National and Kapodistrian University of Athens
Ρόφηση ατμών σε λεπτά πολυμερικά υμένια
Abstract
dc:descriptionSorption of Volatile Organic Compounds (VOCs) in polymer films and the ensuing physicochemical interactions between polymer and analyte are important phenomena in applications concerning chemical sensors. The principle of various sensors is based on the swelling of polymers in the presence of VOCs resulting in a change of a physical property. The main objective of this work is the evaluation of the sorption properties of a series of polymers since the need for proper sensing layer is very important in gas sensing applications. Thickness changes of polymers in the form of supported films due to absorption of vapors by applying white light reflectance spectroscopy (WLRS) was studied. The polymers tested include three members of a homologous series of relatively hydrophobic poly (alkyl methacrylates), the hydrophilic poly (2-hydroxyethyl methacrylate) and two poly (dimethylsiloxane-co-diphenylsiloxane) copolymers. The thickness expansion of supported films upon exposure to different activities of four vapors of varying polarity and hydrogen bonding ability (methanol, ethanol, ethyl acetate and water) was studied. The deduced sorption isotherms were fitted to the Flory-Huggins equation and interaction parameters χ, as well as solubility coefficients S at infinite solute dilution were deduced for each binary system. After the evaluation of the swelling behavior of the polymeric materials, four of them have been chosen to be used as sensitive layers in capacitance type chemical sensors. The selected polymers used in the array are PBMA, P(DMS-co-DPhS) -OH PHEMA PEI. Chemocapacitive sensors are based on changes in the dielectric properties of the sensing material due to sorption of analytes. The capacitance responses of a four InterDigital Chemocapacitive (IDC) sensor array upon exposure to various concentrations of four analytes and of their binary mixtures are presented. Reproducible and reversible changes were found for the exposure to all vapors. At low vapor concentrations and/or low analyte sorption in the polymer layer the capacitance response of each sensor may be considered linear with vapor concentration. The normalized capacitance response was correlated with estimated values of the capacitance change based on the permittivities ε of each mixture component (polymer/analyte) and the volume fractions of the sorbed analytes using Clausius Mossoti mixing rule equation. The volume fractions derived from the interaction parameters. The theoretical model is capable of predicting the response of the sensors. The capacitance response AC of the sensor array to binary mixtures of the four analytes was also studied showing that it could be approximated by the sum of the pure components responses. The responses are fairly reproducible and reversible thus, allowing detection of each components removal from the mixture. The behavior of sensors based on PBMA and PHEMA filled with BaTiΟ₃ was studied. The deposited polymer/BaTiΟ₃ films were characterized by microscopy showing that nanoparticles are better dispersed into the PBMA matrix. In all cases the ε of the composite increased with the increase of the filler following the Lichtenecker “loglaw” relationship. This indicates that the logarithm of the composite’s ε is linearly proportional to the volume fraction of BaTiΟ₃. The initial capacitance values for each composite used as sensitive layers on the chemocapacitors showed the same trend. Incorporation of BaTiΟ₃ in the sensing layer results in increased initial capacitance CP. With increasing amount of BaTiΟ₃ load the response ΔC to each analyte is increased.
Degree
thesis:*- Grantor dc:publisher
- National and Kapodistrian University of Athens
- Year dc:date
- 2010
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Manoli, Kyriaki
- Μανώλη, Κυριακή
Subjects
dc:subject × 20- Ρόφηση σε λεπτά πολυμερικά υμένια
- Ισόθερμες ρόφησης ατμών
- Αισθητήρες χωρητικότητας
- Χημικοί αισθητήρες αερίων
- Σύνθετα διηλεκτρικά υλικά
- Μεθακρυλικά πολυμερή
- Απόκριση χημειοπυκνωτών σε δυαδικά μίγματα
- BaTiΟ₃
- Vapor sortion in thin polymeric films
- Sortion isotherms
- Capacitance sensors
- Gas sensors
- Dielectric composites
- High-K BaTiΟ₃
- Methacrylic polymers
- Capacitance response to binary mixtures
- Φυσικές Επιστήμες
- Χημεία
- Natural Sciences
- Chemical Sciences
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/25869