Back to search

Aristotle University Of Thessaloniki (AUTH)

Μορφοποίηση ηλεκτροδίων άνθρακα και εφαρμογή τους σε αναλυτικούς και βιοαναλυτικούς σκοπούς

Abstract

dc:description

This thesis is focused on the deposition of bismuth(III), under different conditions of electrolysis, on substrates of electrochemically oxidized graphitized polyacrylonitrile carbon fibers (PAN-carbon fibers). The electrodes modification was examined either electrolytically, in aqueous solutions of Bi(NO3)3·-HNO3, by immersing and electrolyzing them in the electrolyte solution, either by ion-exchange (from acid solutions of Bi(III) salts) followed by electrochemical reduction. According to the cyclic voltammetric criteria, the Bi(III) deposition was successfully achieved on the carbon fibers surface, employing both of the prementioned ways of deposition. The study of the electrochemical behavior of bismuth modified carbon fibers electrodes was continued by applying the method of Impedance Spectroscopy (IS). In order to assess the impedance plots and to obtain the optimized values of the experimental plots, we examined the «fitting» of the experimental data, using the CNRLS (Complex Non- Linear Regression Least-Squares) fitting software (in the potential region -0.2 to -1.8 V, versus SCE, in the anodic and cathodic directions), by checking a series of equivalent circuits. The best fitting was achieved by the modified equivalent circuit in which the the doublelayer capacitive behavior is descriped by a constant phase element (CPE), (originating from inhomogeneity and/or the roughness of the modified electrode surface). The Quality Fitting Diagrams exhibited the absolutely satisfactory representation of the frequency response by the selected equivalent circuit In the course of experiments, the analytical behavior of bismuth modified electrodes of carbon fibers (CF) and glassy carbon (GC) was studied, applying the method of Square Wave Anodic Stripping Voltammetry (ASSWV). The electrodes were prepared in situ on a glassy-carbon electrode (GCE) and on a carbon fiber electrode (CFE) from acetate buffer (pH 4,5) containing 200 μg/L of bismuth(III), as well ex situ on electrochemically oxidized graphitized polyacrylonitrile carbon fibres from Bi(NO3)3-HNO3 (aqueous) solutions. These electrodes were proved to be satisfactory voltammetric sensors as they could determine up to four heavy metals (Zn, Cd, Pb, Cu) one by one or all together. These metals are attracting increasing attention in the enviromental field as they belong in the group of toxic metals. The validation of the developed method (AS-SWV) was based on the Commission Decision of 12 August 2002 (2002/657/EC). The performance characteristics were calculated according to the Commission Decision, regarding the three kinds of modified carbon electrodes. Τhe interference-free stripping voltammetric determination of copper, in the presence of Bi+3, was achieved by employing a sensitive method introduced by Pacheco at al. The experimental variables were optimized and then the Bi-FEs were successfully applied in the analysis of real samples: a) mineral water, b) tap water, as well in certified reference water samples: c) Wastewater Treatment Plant, d) Mixed Industrial effluent e) mussel tissue and f) bovine liver, containing traces Cd+2, Pb+2, Zn+2 and Cu+2. The obtained results were characterized by satisfactory accuracy (high repeatibility) and high sensitivity (low limits of detection, LODs), indicating that the three kinds of modified carbon electrodes hold a great promise for on-site environmental or clinical testing for heavy metals, avoiding the toxic effects of mercury. Finally, the potentiality of the successful DNA immobilization on the glassy carbon electrode surface was a promising sign for the electrodes further use in specific bianalytical applications. In contrary, DNA wasn’t successfully immobilized on the carbon fiber electrode surface due its roughness that hinders the adhesion of the double strand (dsDNA). In addition, the electrochemical oxidation on carbon electrodes could lead to the oxidation of DNA bases. In conclusion, the developed voltammetric sensors are environmentally friendly, they exhibit sensitivity comparable to mercury electrodes and they are ideally suited for on-field measurements as well for decentralised electrochemical applications.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2011

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Αναστασιάδου, Ζαφειρία-Μαρία
  • Anastasiadou, Zefi

Subjects

dc:subject × 20

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/25905

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Αναστασιάδου, Ζαφειρία-Μαρία; Anastasiadou, Zefi. Μορφοποίηση ηλεκτροδίων άνθρακα και εφαρμογή τους σε αναλυτικούς και βιοαναλυτικούς σκοπούς. Aristotle University Of Thessaloniki (AUTH), 2011. http://hdl.handle.net/10442/hedi/25905