National Technical University of Athens (NTUA)
Ευρυζωνική μετάδοση σημάτων μέσω γραμμών μέσης τάσης: μοντέλα διάδοσης - χωρητικότητα
Abstract
dc:descriptionThe main objective of this thesis is broadband signal transmission via three-phase overhead Medium-Voltage (MV) lines above the lossy plane ground and three-phase underground MV lines with common shield and armor. The MV/BPL (Broadband over Power Lines) transmission channel is investigated with regard to spectral behavior, usable bandwidth, end-to-end signal attenuation and capacity. It is found that these features depend drastically on the MV cables used, the MV grid topology, mainly on the number and electrical length of the branches existing along an end-to-end BPL connection, the level of power injection, the noise power levels and the spectrum allocation rules used to regulate BPL emissions. Chapter 1 provides an introduction of the power distribution network structure in its both aspects: architecture and installation devices. Typical configurations in Europe are considered. Chapter 2 assesses the environment of MV/BPL technology in the telecommunications market, based on the state-of-the-art of the technology and the commercial and operational experiences that MV/BPL has already built up. This Chapter focuses on the potential role MV/BPL may play in broadband access. Chapter 2 also analyses the factors that could affect the development of MV/BPL technology, with special emphasis on the specifications of the technical standards, the regulations suggested for MV/BPL systems and the studies conducted by various parties to investigate the characteristics of MV/BPL emissions. The regulations include both the established and proposed radiation limits for MV/BPL systems. Chapter 3 considers the frequency-domain solution of the MTL (Multiconductor Transmission Lines) equations for an n+1 conductor line. Using matrix notation, the solutions to these phasor MTL equations are similar to the solutions for two-conductor lines. The method used to solve these phasor MTL equations is to decouple them via a similarity transformation. Chapter 4 proposes a complete methodology for the deterministic modeling of the end-to-end transfer function associated with MV/BPL networks, in the light of the MTL theory. Based on general multiconductor power line cables and their fundamental propagation characteristics (definition of eigenmodes, propagation constant and modal characteristic impedance), a multidimensional scattering matrix formalism is introduced to perform an accurate analysis of global MV/BPL networks including multiconductor cable segments, derivation points and termination loads. Under three basic assumptions, multiconductor network analysis can be reduced to the parallel analysis of independent modal scalar-waves networks via suitable multipath methods like MEB method (Multipath Echo Based method), ABCD method, TM method (T-Matrix method) or HSC method (Hybrid Smith Chart method). Chapter 5 ends up with the simulation model of a three-conductor overhead MV/BPL dissipative line above a lossy ground, after providing an exact expression of the matrix modal equation of the line, assuming that there are as many discrete modes of propagation as there are conductors. Furthermore, the expressions of the distributed series-impedance and shunt-admittance matrices are presented, with reference to the definition of the wire-to-ground voltage. Chapter 6 analyzes underground MV/BPL transmission taking into account coupling phenomena through cable shields. The concept of tube impedances for cable shields is discussed. A wide range of transmission line models for multi-sector and multi-core cables with various types of insulations including shield and armor is presented and compared with experiments. The analysis is assorted and completed by other established models reproduced from the literature. Chapter 7 concludes the thesis by considering broadband signal transmission via three-phase overhead MV/BPL lines above the lossy plane ground and via three-phase underground MV/BPL lines with common shield and armor. The established methods dealing with transmission along MV power lines are examined in terms of the end-to-end transfer function under various network configurations. The MV/BPL transmission channel is investigated with regard to its spectral behavior, the usable bandwidth and the end-to-end channel attenuation. It is found that the aforementioned features depend drastically on the number and type of branches existing along the end-to-end MV/BPL signal propagation. Moreover, various topologies of MV/BPL transmission channels have been studied with regard to their capacity. The analysis and relevant simulations reveal that broadband transmission via MV power lines depends drastically on the MV grid topology and the power constraints imposed to suppress EMI (ElectroMagnetic Interference) to other services. The relaxed power injection limits and the lower noise power levels characterizing underground MV/BPL transmission counteracts the extremely high inherent attenuation making the capacity achieved compatible to that achieved in overhead MV/BPL transmission. Especially for overhead MV/BPL networks, a modification to the fixed spectrum allocation/all-protection model to regulate BPL emission is proposed employing power masks adaptive to locally existing wireless services.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2010
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Lazaropoulos, Athanasios
- Λαζαρόπουλος, Αθανάσιος
Subjects
dc:subject × 20- Ευρυζωνική μετάδοση μέσω γραμμών μέσης τάσης
- Επικοινωνίες μέσω γραμμών ισχύος
- Ανάλυση ρυθμών για μετάδοση μέσω γραμμών πολλών αγωγών
- Από άκρο σε άκρο συνάρτηση μεταφοράς και από άκρο σε άκρο εξασθένηση διαύλου
- Χωρητικότητα διαύλου
- Ηλεκτρομαγνητική παρεμβολή και συμβατότητα
- Εναέριες και υπόγειες γραμμές μεταφοράς μέσης τάσης
- Διαλειτουργικότητα και εσωτερική λειτουργικότητα
- Broadband over power - lines (BPL)
- Power line communications (PLC)
- Modal analysis in multiwire transmisssion
- End to end transfer function and end to end channel attenuation
- Channel capacity
- Electromagnetic interference (EMI) and compatibility (EMC)
- Overhead and underground mv power lines
- Interoperability and intraoperability
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Ηλεκτρολόγου Μηχανικού, Ηλεκτρονικού Μηχανικού, Μηχανικού Η/Υ
- Engineering and Technology
- Electrical Engineering, Electronic Engineering, Information Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/26019