University of Western Macedonia
Προσομοίωση φυσικοχημικών διεργασιών σε κυψέλες καυσίμου
Abstract
dc:descriptionThe technology of fuel cells, capable of achieving higher efficiencies compared with conventional power systems, has the potential to contribute to energy conservation and in general to confront contemporary energy and environmental problems. To this end, in the current dissertation a computational model was developed to investigate solid oxide fuel cell’s (SOFC’s) performance under various operational conditions and different fuel feedstock. In particular, the transport processes (i.e. the flow field, the heat transfer, the mass and the charge transport) taking place in a fuel cell, were thoroughly simulated. The effect of operational parameters such as the fuel composition and the applied potential on species distribution and temperature profile as well as on the developed current along the fuel cell was studied. Further to the most common fuel cell feedstock, hydrogen, other fuels such as synthesis gas, methane/steam mixtures and biogas were also examined. It should be mentioned that in the performed simulations the effect of homogenous (water gas shift) and heterogeneous reactions (catalytic and electro-catalytic surface processes) was taken into account. In order to validate the model, the polarization curves (cell voltage – current – power curves, V-I-P), produced by the simulations, were compared to experimental ones, available on the relative literature, and the results showed satisfactory convergence. Additionally, for the methane consisting feeds, a thermodynamic analysis was employed to estimate whether or not carbon deposition was thermodynamically favored or prohibited in the SOFC anode. In conclusion, it was found that the feedstock type and composition are crucial and determinant factors for the produced power density and the overall performance. It was also clear that feedstock other than hydrogen can be used in SOFCs with sufficiently high efficiencies. In parallel, the water gas shift reaction seemed to be important for the species distribution in the fuel cell and consequently for the produced power density. Moreover, it was found that the electrochemical oxidation of CO, which is usually not taken into consideration in the models found in the relative literature, could contribute to additional current production. Simulations allowed for the calculation of temperature distributions and the definition of thermal stresses positions, while the possibility of carbon deposition at the anode electrode was also estimated
Degree
thesis:*- Grantor dc:publisher
- University of Western Macedonia
- Year dc:date
- 2011
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Vakouftsi, Eleni
- Βακουφτσή, Ελένη
Subjects
dc:subject × 18- Κυψέλες καυσίμου
- Κυψέλες καυσίμου στερεού οξειδίου
- Φαινόμενα μεταφοράς
- Υπολογιστική ρευστοδυναμική
- Εσωτερική αναμόρφωση
- Μεθάνιο
- Βιοαέριο
- Fuels cells
- SOFC
- Transport processes
- CFD
- Internal reforming
- Methane
- Biogas
- Engineering and Technology
- Chemical Engineering
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Χημικού Μηχανικού
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/26208