Back to search

University of Patras

Ενίσχυση υποστυλωμάτων οπλισμένου σκυροδέματος με νέα υλικά: ινοπλέγματα ανόργανης μήτρας, οπλισμοί σύνθετων υλικών ή ανοξείδωτου χάλυβα σε εγκοπές

Abstract

dc:description

The effectiveness of a new structural material, namely Textile-Reinforced Mortar (TRM), was investigated experimentally in this PhD Thesis as a means of confining old type reinforced concrete (RC) columns with limited capacity due to bar buckling or due to bond failure at lap splice regions. Comparisons with equal stiffness and strength fiber-reinforced polymer (FRP) jackets allow for the evaluation of the effectiveness of TRM versus FRP. Tests were carried out on nearly full scale non-seismically detailed RC columns subjected to cyclic uniaxial flexure under constant axial load. Thirteen cantilever type specimens with either continuous or lap-spliced deformed longitudinal reinforcement at the floor level were constructed and tested. Experimental results indicated that TRM jacketing is quite effective as a means of increasing the cyclic deformation capacity of old-type RC columns with poor detailing, by delaying bar buckling and by preventing splitting bond failures in columns with lap spliced bars. Compared with their FRP counterparts, the TRM jackets used in this study were found to be equally effective in terms of increasing both the strength and deformation capacity of the retrofitted columns. From the response of specimens tested in this study, it can be concluded that TRM jacketing is an extremely promising solution for the confinement of RC columns, including poorly detailed ones with or without lap splices in seismic regions. Moreover this PhD Thesis presents the results of a large-scale experimental program aiming to study the behavior of RC columns under simulated seismic loading, strengthened in flexure (of crucial importance in capacity design) with different types and configurations of near surface mounted (NSM) reinforcing materials. The role of different parameters is examined, by comparison of the lateral load versus displacement response characteristics (peak force, drift ratios, energy dissipation, stiffness). Those parameters were as follows: carbon or glass fiber reinforced polymers (FRP) versus stainless steel, configuration and amount of NSM reinforcement, confinement via local jacketing, and type of bonding agent (epoxy resin or mortar). The results demonstrate that NSM FRP or stainless steel reinforcement is a viable solution towards enhancing the flexural resistance of reinforced concrete columns subjected to seismic loads. With proper design, which should combine compulsory NSM reinforcement with local jacketing at column ends, it seems that column strength enhancement does not develop at the expense of low deformation capacity.

Degree

thesis:*
Grantor dc:publisher
University of Patras
Year dc:date
2008

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Bournas, Dionysios
  • Μπουρνάς, Διονύσιος

Subjects

dc:subject × 34

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/26214

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Bournas, Dionysios; Μπουρνάς, Διονύσιος. Ενίσχυση υποστυλωμάτων οπλισμένου σκυροδέματος με νέα υλικά: ινοπλέγματα ανόργανης μήτρας, οπλισμοί σύνθετων υλικών ή ανοξείδωτου χάλυβα σε εγκοπές. University of Patras, 2008. http://hdl.handle.net/10442/hedi/26214