National Technical University of Athens (NTUA)
Τροποποίηση εμπορικών και εργαστηριακά παραγόμενων ινών άνθρακα με ηλεκτροχημική επεξεργασία μέσω κυκλικής βολταμετρίας και χαρακτηρισ...
Abstract
dc:descriptionThe scope of the doctoral thesis is the surface modification of commercial and laboratory-produced carbon fibres with electrochemical treatment by cyclic voltammetry and their characterization and the correlation of the parameters / conditions with their structure. To achieve this goal, commercial carbon fibres are used as working electrodes in a suitable electrochemical cell and they are surface modified by cyclic voltammetry, choosing various redox conditions based on the concentration of electrolyte solution, the sweep scan range, the sweep scan rate and the number of treatment cycles and subsequently they are characterized. Since commercial carbon fibres bear oxygen-containing groups in their structure by unknown origin of surface modification from the industry, they are not chemically inert and therefore they are subjected to pyrolysis anew and afterwards they are electrochemically treated and characterized. In addition, laboratory-produced carbon fibres, after appropriate batch processing thermal oxidation of commercial acrylic fibres and their carbonization, they are surface modified and characterized. The appropriate selection of parameters of the electrochemical treatment of carbon fibres is very important for their further application in practice. When carbon fibres are used as electrodes or it is desirable to enhance their catalytic behaviour by doping with metal ions, the presence of intercalation compounds for the formation of graphitic oxides and of the partially reduced graphitic oxides in carbon structure is needed, which increase its ion exchange properties, especially in its bulk. When carbon fibres are used as electrodes in electrochemical double-layer capacitors / EDLC (also known as supercapacitors, ultracapacitors), apart from their activation, the presence of an increased number of surface groups of carbonyl or quinone type is desirable as well. When carbon fibres are used as reinforcing agents in composite materials, the formation of proper and sufficient fibre surface oxides and also the increase of their surface roughness are necessary, in order to establish better adhesion between fibre-matrix. Additionally, when they are used as adsorption agents (after their activation) the presence of a vast variety of characteristic groups (acidic, basic) is necessary, located on the outer surface edge sites of the basal planes of carbon, since they constitute active surface sites for adsorption of substances. Η περίληψη πρέπει να περιλαμβάνει τον στόχο, τη μεθοδολογία και τα αποτελέσματα - συμπεράσματα της διατριβής.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2011
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Γεωργίου, Παντελίτσα
- Georgiou, Pantelitsa
Subjects
dc:subject × 23- Ίνες άνθρακα
- Ανθρακοποίηση - πυρόλυση
- Τροποποίηση επιφάνειας
- Κυκλική βολταμετρία
- Προσρόφηση ανιοντικών / κατιοντικών χρωστικών
- Χαρακτηριστικές ομάδες
- Τιτλοδότηση κατά Boehm
- XPS, FTIR, RAMAN, XRD, SEM/EDS
- Μηχανικές ιδιότητες
- Carbon fibres
- Carbonization / pyrolysis
- Surface modification
- CYCLIC VOLTAMMETRY
- Anionic / cationic dye adsorption
- Functional groups
- Boehm’s titration technique
- Mechanical properties
- Engineering and Technology
- Chemical Engineering
- Materials Engineering
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Χημικού Μηχανικού
- Μηχανική Υλικών
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/26281