National Technical University of Athens (NTUA)
Διερεύνηση και ερμηνεία της συμπεριφοράς ασβεστολιθικών τσιμέντων σε συνδυασμένο περιβάλλον χλωριόντων και θειικών ιόντων
Abstract
dc:descriptionThe behavior of Portland limestone cements in the combined chloride and sulfate environment was studied. Portland limestone cements may contain limestone as a main constituent in percentages ranging between 6% and 35% (EN 197-1 (2000)). A problem associated with the use of limestone in cement and concrete is that it may exhibit a lack of durability due to the formation of thaumasite as a result of sulfate attack at low temperatures. Building constructions can be found in areas near the sea, where groundwater, contaminated with sea water, contains significant amounts of chloride and sulfate ions. Thus, it is of great interest to study the formation of thaumasite, the chloride diffusion, as well as the reinforcement corrosion in the combined chloride and sulfate environment. Concrete and mortar specimens were prepared using ordinary Portland cement and two Portland limestone cements. Additional specimens were made by partial substitution of the limestone cement with natural pozzolana, fly ash, ground granulated blastfurnace slag or metakaolin. The specimens were immersed in chloride and sulfate solutions and stored at 5oC. Concrete deterioration due to sulfate attack was evaluated using visual examination, as well as mass and compressive strength measurements. Thaumasite formation was identified using the XRD analytical technique. Chloride diffusion was studied through the chloride profiles that were experimentally obtained. Mortar reinforcement corrosion was investigated measuring corrosion potential, as well as using the linear polarization method, while mass loss of the steel rebars and specimens’ carbonation depth were also determined. Limestone cement concrete is more susceptible to thaumasite formation compared to that produced by ordinary cement. Both chloride diffusion and reinforcement corrosion are more intensive when limestone cements are used. The use of mineral admixtures in limestone cement concrete improved its durability against sulfate attack, while also lead to lower chloride diffusion. Chlorides intercept and delay the sulfate attack on concrete specimens made without mineral admixtures. On the contrary, chlorides amplify the deterioration caused by sulfates, when specimens contain mineral admixtures. Sulfates favor both chloride diffusion and reinforcement corrosion. Fly ash was proved as the most efficient mineral admixture, followed by metakaolin and blastfurnace slag. Natural pozzolana presented the most limited beneficial effect.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2011
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Sotiriadis, Konstantinos
- Σωτηριάδης, Κωνσταντίνος
Subjects
dc:subject × 20- Σκυρόδεμα
- Ασβεστολιθικά τσιμέντα
- Ανθεκτικότητα
- Χλωριόντα
- Θειικά ιόντα
- Ταουμασίτης
- Διάχυση χλωριόντων
- Διάβρωση οπλισμού
- Concrete
- Limestone cements
- Durability
- Chlorides
- Sulfates
- Thaumasite
- Chloride diffusion
- Reinforcement corrosion
- Επιστήμες Μηχανικού και Τεχνολογία
- Μηχανική Υλικών
- Engineering and Technology
- Materials Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/26288