University of Patras
Προσδιορισμός παραμέτρων σχεδιασμού εδαφών εμποτισμένων με αιωρήματα λεπτόκοκκων τσιμέντων
Abstract
dc:descriptionA laboratory investigation was conducted in order to evaluate the properties and the application area of a series of new grout materials, that can be used instead of chemical solutions, to improve the soil properties. Three types of cement were used and milled so that three additional gradations would result from each one. Four different gradations of calcareous sand were also used. The properties of suspensions were determined in terms of viscosity, rheology, bleeding, set times, strength and injectability. The properties of grouted sands as permeability, static loading and dynamic loading were determined with tests in specimens which were produced by conducting one-dimensional injections, using a specially constructed device. The behaviour of grouted sands in static loading was quantified by conducting unconfined compression and triaxial compression. The dynamic properties of grouted sands were evaluated with resonant column tests and bender elements tests. The water to cement ratio is the most important parameter that defines both the qualities and the behaviour of the suspensions. Increase in the water to cement ratio causes substantial improvement in the rheology, but has adverse effect on the bleeding of the suspensions and on the strength of their sediments. The cements grinding has an adverse effect on the rheological properties and on the injectability of the suspensions, whereas it has a favourable effect on the bleeding and the strength. Permeation grouting with microfine cements have shown that (a) reduce the coefficient of permeability of the sands up to 5 orders of magnitude, (b) provide significant cohesion (up to 1.5MPa), in terms of the Mohr-Coulomb failure criterion, (c) do not affect the angle of internal friction of the sands, (d) increase the initial tangent modulus of the sands up to 20 times, (e) reduce the failure deformation of the sands up to 10 times, (f) increase the dynamic shear modulus and Young’s modulus of the sands up to 10 times for confining stress σ3=400kPa and up to 25 times for confining stress σ3=50kPa, (g) increase the damping ratio up to 4 times and (h) increase the Poisson ratio up to 30%.
Degree
thesis:*- Grantor dc:publisher
- University of Patras
- Year dc:date
- 2009
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Pantazopoulos, Ioannis
- Πανταζόπουλος, Ιωάννης
Subjects
dc:subject × 20- Λεπτόκοκκα τσιμέντα
- Ενέσεις εμποτισμού
- Ιδιότητες αιωρημάτων
- Ενεσιμότητα
- Διαπερατότητα
- Μηχανικές ιδιότητες
- Διατμητική αντοχή
- Δυναμικές ιδιότητες
- Microfine cements
- Permeation grouting
- Suspension properties
- Injectability
- Permeability
- Mechanical properties
- Shear strength
- Dynamic properties
- Engineering and Technology
- Civil Engineering
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Πολιτικού Μηχανικού
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/26405