National Technical University of Athens (NTUA)
Αεριοποίηση - υαλοποίηση αποβλήτων με την τεχνική του πλάσματος
Abstract
dc:descriptionThe main objective of this PhD is the investigation of the method of plasma gasification / vitrification of waste with emphasis on the characterization of the process products (synthesis gas and solid vitrified residue) and the study of the environmental performance and the capability to produce energy from waste by determining the relevant balances. A thorough bibliographical review of the different thermal methods for the treatment of solid waste took place in the theoretical part of the PhD. The basic phases of the methodology include:•Series of preliminary tests for the extraction of conclusions on the effect of a wide range of parameters related to the operation of the demonstration gasification / vitrification unit. •Characterization of the waste that was treated in the demonstration unit.•Determination of the composition of the produced synthesis gas (% content in CO, CO2, H2 και CH4)The basic conclusion that is made is that the produced synthesis gas is characterized by high content in CO and H2 and, therefore, high energy content. The influence of certain parameters, such as the humidity and inorganic content of the waste to be treated in the demonstration gasification / vitrification unit, to the calorific value of the produced synthesis gas is also investigated.•Determination of the mass and energy balances and consequently the energy that is produced and can be utilized as either electrical energy or heat.This constitutes one of the most basic steps of this PhD, since the relevant data constitute major factor for the assessment of the viability of plasma technology for the treatment of waste, determining the capability to convert the waste content in electrical energy (one part is necessary for covering the operation needs of the plasma system and the rest is available for exploitation and sale) and heat. A useful calculation tool for the determination of the density of the produced synthesis gas and its energy content per volume and weight unit was also developed on the basis of the % v/v composition of the synthesis gas in CO, H2, CO2 & CH4, which is experimentally determined. •Determination of the final air emissions and comparison with the limits set by the relevant EC and national legislative frameworkThe experimental results show that the environmental behavior of the demonstration gasification / vitrification unit in relation to the final air emissions is satisfying, seeing that the polluting parameters of the air emissions are well below the limits set by the EC Directive 2000/76 on the incineration of waste. The modification of the demonstration unit with the addition of heat exchanger at the exit point of the final air emissions to the atmosphere for cooling air emissions and converting main part of the included water vapors to liquid contributed to the reduction of the emitted to the atmosphere gases. •Characterization of the produced solid vitrified residue: The following were studied:the humidity content of the vitrified solid residuethe total carbon percentage the content in metalsthe leachability of metals from the solid vitrified slag via TCLP the leachability of metals using water as leaching medium.the influence of the cooling method used for the vitrified slag residue (via the use of air or water) to its leaching propertiesthe influence of the pH, temperature, contact time, stirring conditions and the size of the particles of the solid vitrified residue to the leaching behavior of different metalsthe structure of the solid vitrified residue by using SEM, XRD, XRF and EDX.Almost the total sum of the inorganic content of the waste used as feedstock in the unit ends up at the solid vitrified residue, while the total carbon content is converted in the gas phase. The fact that the produced vitrified residue is inert and is characterized by low leaching properties constitutes main experimental outcome. This is based on the results of two different well used tests that were performed for the assessment of the leaching properties of the slag generated within the gasification / vitrification process (TCLP & European Decision 33/2003). Long and detailed experimental series were designed and performed in order to study the behavior of different metals included within the slag under different conditions of pH, particle size, temperature and stirring conditions. The water-cooled slag presents higher resistance in metal leaching in relation to the air-cooled slag. In general, the completion of the extended experimental part of the PhD leads to the conclusion that the use of this technology is effective and flexible. The process was found to be environmentally friendly, but also a way to cover part of the energy demands.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2011
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Moustakas, Konstantinos
- Μουστάκας, Κωνσταντίνος
Subjects
dc:subject × 20- Απόβλητα, Θερμική επεξεργασία
- Αεριοποίηση
- Υαλοποίηση
- Αέριο σύνθεσης
- Στέρεο υαλοποιημένο υπόλειμμα
- Τεχνολογία πλάσματος
- Ισοζύγια μάζας και ενέργειας
- Αέριες εκπομπές
- Thermal waste treatment
- Gasification
- Vitrification
- Synthesis gas
- Solid vitrified residue (SLAG)
- Plasma technology
- Mass and energy balances
- Air emissions
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Χημικού Μηχανικού
- Engineering and Technology
- Chemical Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/26545