Abstract
dc:descriptionElectronic systems for smart power control are being increasingly installed in modern electrically-propelled vehicles, motors, and actuators for precise: a) position and motion adjustment, b) force and torque regulation, c) power efficiency optimization, and d) energy saving. The functionality of such controllers relies primarily on electric current sensors capable of monitoring precisely pulsed currents varying from DC up to frequencies as high as 100KHz and of reading current alteration rates as high as 10GA/sec. This requirement sets the sensor bandwidth specification to at least 1MHz for 5KA maximum current amplitude and resolution of 0.02%. Additionally, modern power control applications require current sensing in multiple conductors positioned densely among each other. The aforementioned restriction poses limitations concerning sensor dimensions and cost as well as positioning distance between sensor and current conductors. Temperature stability is another important parameter that severely affects the performance of current sensors, especially in the case of industrial applications, where they are subjected to large temperature variations. The work that has been done for this thesis is a part of the IHACS project. The IHACS project aims at the development of a new family of very compact, galvanically isolated, open-loop, wide-band, self-calibrating current sensors. The current sensor that is used is a current sensor based on the Hall effect. This thesis consists of two parts: a) The development of 2D Matlab Simulator for Eddy Current Field Filters, b) The design of a Wide-Band Magnetometer for Current Sensing Applications (Readout circuit). One of the main parasitic effects in Hall sensors and generally in semiconductors are the Eddy Currents that are induced into the semiconductor surface. Because of the presence of ac excitation current in a Hall device, ac self-magnetic field is produced. High frequency magnetic field components induce eddy currents in the Hall plate. This magnetic field forces the current to avoid the center of the device and to concentrate at the extremities of the cross-section of the device. This produces an increase in the device resistance in high frequencies. These Eddy Currents disturb the uniform flow of the biasing current within the Hall plate, destructing the sensitivity of the device even as low frequencies as DC. This is a non-linear effect, thus a linear electronic filter cannot be used to filter out high frequencies. The intention is the development of a flux shaping device in order to filter out high frequency (parasitic) field components. An open source software tool written in Matlab script language is developed and presented here. That tool is capable of solving 2D, quasi-static electromagnetic problems inside and around current conductors and/or conducting shields and is called Magnetic Field Galvanically Isolated, Wide-Band Current Sensors Simulator (MFS). This CAD tool that has been developed can be used to simulate the behaviour of shields in order to choose the one that can be optimally used. The second part of this thesis is a new magnetometer for current sensing applications, with wide bandwidth that ranges from DC up to 1MHz. In order to achieve this functionality two types of magnetic sensors are used, one capturing low frequency components and one for high frequencies. A Hall device serves the first purpose and a pick-up coil serves the second. Due to offset voltage and temperature stability, Hall sensors are limited to measurements up to few KHz. Pick-up coil performance is not good at DC, but is performing well at higher frequencies. The Readout circuit that is presented here merges the signal from the Hall sensor and the signal from the pick-up coil. The goal is to get a measurement at the output that is flat in the frequency domain up to 1MHz in order to be able to calculate the current sensor measurement. This work includes the circuit design, simulation results, fabrication and measurement results of two fabricated chips. Also, the results of the final PCB measurements are included.
Degree
thesis:*- Grantor dc:publisher
- University of Thessaly (UTH)
- Year dc:date
- 2012
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Λιάκου, Φανή
- Liakou, Fani
Subjects
dc:subject × 7Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/26585