University of Patras
Διερεύνηση των απωλειών μαγνητικών στοιχείων διαρρεόμενων απο υψίσυχνα ρεύματα για εφαρμογές σε διατάξεις ηλεκτρονικών ισχύος
Abstract
dc:descriptionThe present work has a twofold goal: a) To investigate the phenomena affecting the copper losses in windings that consist of conductor layers and to develop a new model for the calculation of copper losses in round cross section conductor windings with random distribution of these conductors in the available core window area. b) To develop a complete methodology of making experimental measurements on magnetics components through the investigation of the several measurement error factors and to design a resonant converter suitable for the excitation of magnetic components with high frequency sinusoidal voltage. In the first part of this thesis there is a general description of the physical phenomena that take place in magnetic components. Moreover, there is an overview citation and critical review of the most important by now theoretical works on these issues. In the second part of this thesis there is at first a short review of the three classic models for the calculation of copper losses in windings made of layers and then a finite element software is utilized for the investigation of the accuracy and field of application of each of them. The edge effect in layered windings with either round cross section or foil conductors is investigated. Moreover, for layered windings with round cross section conductors a study is carried out about the difference in the effective resistance between the cases of square and hexagonal fit schemes. Following this work is the development of a new model for the calculation of copper losses in round cross section conductor windings with the several turns placed with a random manner in the available core window area. The final equation of the model is simple and incorporates only three easily determinable parameters directly related to known constructive parameters. The new expression is validated with experimental measurements. The first work presented in the third part of this thesis (chapters 6 and 7) is the design and construction of a resonant converter suitable for the excitation of magnetic components with a clearly sinusoidal voltage of high frequency (up to 1MHz) and amplitude of several hundred volts at several tenths of Watts power level for the implementation of experimental measurements. Following that, there is a description of the methods available to measure the power losses of magnetic components and acquire the hysteresis loop of their magnetic cores and the several error factors are analyzed. Some methods are proposed for the correction of the measured hysteresis losses if these are determined from area of the hysteresis loop in the case of a known phase error when recording magnetic intensity or magnetic induction. At last the reduction with temperature of ohmic resistance at high frequencies is explained.
Degree
thesis:*- Grantor dc:publisher
- University of Patras
- Year dc:date
- 2009
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Δημητρακάκης, Γεώργιος
- Dimitrakakis, Georgios
Subjects
dc:subject × 20- Μαγνητικά στοιχεία υψηλών συχνοτήτων
- Μετρήσεις απωλειών σε υψηλές συχνότητες
- Ανάλυση με πεπερασμένα στοιχεία
- Δινορρεύματα
- Τυλίγματα
- Μετατροπείς συντονισμού
- Φαινόμενο γειτνίασης
- ΕΠΙΔΕΡΜΙΚΟ ΦΑΙΝΟΜΕΝΟ
- High frequency magnetics
- High frequency loss measurements
- Finite element analysis
- EDDY CURRENTS
- Windings
- Resonant converters
- Proximity effect
- SKIN EFFECT
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Ηλεκτρολόγου Μηχανικού, Ηλεκτρονικού Μηχανικού, Μηχανικού Η/Υ
- Engineering and Technology
- Electrical Engineering, Electronic Engineering, Information Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/26612