Back to search

Aristotle University Of Thessaloniki (AUTH)

Πετρολογία των λευκοκρατικών γρανιτών του Πλατανοχωρίου Χαλκιδικής και δυνατότητες αξιοποίησης των αστρίων τους στην κεραμική βιομηχανία

Abstract

dc:description

The granite of Platanochori Chalkidiki geotectonically belongs to the Serbomacedonian Mass and especially to the Upper Unit of Vertiskos. Fifteen samples were collected from the granite surface outcrops, 4 samples from the outcrops of an operating quarry in the study area and 13 samples from 48 drilling cores from the depths of 11 m, 15 m and 20 m, approximately. Mineralogical and chemical examinations showed that the Platanochori granite body consists of two-mica granite, gradually turning to muscovite granite, leucogranite, porphyritic granite, while foliated granite occurs at the margins. The main mineral constituents are quartz, K-feldspars, plagioclases, muscovite and biotite while apatite, zircon, fluorite, sericite, calcite, chlorite, epidote and opaque minerals appear in minor amounts. From the examination of the main mineral constituents of the Platanochori granite under the polarized microscope and the SEM the following are revealed: Quartz appears with anhedral crystals presenting and notched margins. Plagioclases in all petrographic types of the examined granite are composed of albite with An<5%. They show synthetic twin crystals and zoned structure, usually normal. K-feldspars are mainly orthoclases with the amount of albite varying between 2% and 6.6%. Perthitic intergrowths are common, while alterations to kaolinite and sericite are observed. Muscovite is the most abundant mica. It occurs as primary as well as secondary. Biotite is the most common ferromagnesian mineral. Most often it is altered to chlorite or it is discoloured giving white mica. The vein rocks intersecting the Platanochori granite are aplites and pegmatites. These are two acidic and light coloured rocks consisting of quartz, orthoclase, albite and muscovite. From the chemical analysis of the Platanochori granite, it is shown that the major elements follow the usual calc-alkaline trend. The chemistry of magma reveals that the Platanochori granite is of calc-alkaline nature and shows metaluminous to peraluminous character. For marketing and industrial worth being of the Platanochori granite its technological characteristics were determined and studied together with its mineralogical and chemical composition. Specifically, from the determination of particle size distribution, it was found that their average grain size, after the grinding, ranges from 8.09 μm to 19.55 μm. With the thermogravimetric and differential thermal analysis (TG-DTA), which was applied to samples GR37 and GR45, chosen as more suitable, it was showed that the melting of feldspars starts at about 1000oC and appears to have been completed at 1170oC. From the calcination of specimens at 1100oC, 1150oC and 1200oC products with low porosity, glossy surfaces and high hardness resulted without surface defects and deformations, while they presented colour in shades of pink - grey. The specimens were examined in the scanning electron microscope (SEM). As shown by the photomicrographs taken from the surface of the studied specimens, the melting of the grains has already begun at 1100oC. At 1150oC it has sufficiently advanced, so all specimens have fewer pores and voids. At 1200oC the surface appears completely vitrified. Inwards the melting of the material seems to be moving more slowly. So, at 1150oC all specimens show several open pores and voids, while bubbles (closed pores) appear. At 1200oC the percentage and the size of the pores and bubbles is significantly reduced. All specimens showed the higher values of linear shrinkage at 1150oC. The apparent specific gravity of specimens seems to follow the same trend with their linear shrinkage. Generally, the specimens at all three temperature areas relatively present high values of specific gravity indicating that the calcined products have low porosity and they are not spongy. Regarding the porosity, in all specimens decrease of the apparent porosity with increasing calcination temperature was observed. The water absorption follows the same trend as the porosity, because it depends directly on it. From the determination of uniaxial compressive strength of the specimens the higher values were observed after their calcination treatment at 1200oC. From the calculation results of the physical radioactivity it is concluded that the Platanochori granite can be safely used as a building material. Finally, a model of enrichment for the improvement of the examined material is suggested. According to this model, the uses of the studied granite in the ceramics industry are enlarged.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2011

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Καστρινάκη, Αικατερίνη

Subjects

dc:subject × 12

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/26665

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Καστρινάκη, Αικατερίνη. Πετρολογία των λευκοκρατικών γρανιτών του Πλατανοχωρίου Χαλκιδικής και δυνατότητες αξιοποίησης των αστρίων τους στην κεραμική βιομηχανία. Aristotle University Of Thessaloniki (AUTH), 2011. http://hdl.handle.net/10442/hedi/26665