University of Patras
Διερεύνηση γεωτεχνικής σεισμικής μόνωσης κατασκευών σε πασσάλους με χρήση γεωαφρού EPS
Abstract
dc:descriptionPresented in this dissertation is a comprehensive theoretical and experimental investigation of the potential to apply geotechnical seismic isolation to bridge piers founded on piles using an expanded polystyrene of compressible inclusion (geofoam EPS). The concept concerns the embedment of piles in a geofoam EPS compressible inclusion with strictly controlled modulus of elasticity, thickness and length, resulting in increased of the structure natural period and, consequently, in reduced seismic design forces. The inclusion replaces the natural soil material around the piles with a commercially produced material providing control over the mechanical characteristics of the foundation and allowing for reduced safety factor values compared to the conventionally adopted in Geotechnical Engineering. At the same time, the vertical load bearing mechanisms are not disturbed, since these loads are carried by the lower part of the piles, far from the area where the geosynthetic is placed. The proposed system offers the advantage of easy installation, maintenance or replacement in the event of damage or failure at a considerably lower cost compared to more conventional solutions based on the use of bearings from the classical solutions of isolation. In the first, analytical, part of this dissertation, the investigation includes: (1) the stiffness coefficients for flexible elastic piles or pile groups with compressible inclusion in homogeneous soil, (2) the effect of the compressible inclusion on the response of bridges piers with rigid superstructure, (3) the effect on the natural period of the bridges piers with flexible superstructure, (4) the reduction of the seismic design forces and (5) the effect on the pile displacements and moments. For the documentation of this concept, an exact analytical solution is presented, in two dimensions, of the pile-inclusion interaction with in the framework of the theory of linear elasticity. The results are validated by comparison with results from numerical analyses using the finite elements. The second part of this dissertation is based on an extensive laboratory investigation of the behavior EPS geofoam compressible inclusion specimens in the form hollow cylinders cut in half or quarters (central angle of 180o and 90o) under monotonic compressive loading through a stiff pile. The mechanical behavior of specimens with this particular shape is correlated with the mechanical behavior observed by conventional testing of cylindrical specimens in unconfined compression. Yield stress, compressive strength and initial modulus of elasticity are examined. The results of these tests are used to produce normalized p-y curves which are correlated to corresponding curves obtained from unconfined compression tests on cylindrical specimens. Finally, the stiffness values calculated from the results of the laboratory tests on compressive inclusion specimens with a central angle of 180o and 90o are compared with the values obtained by the closed form analytic solutions and correction factors are proposed. The proposed method is rational, is based on fundamental natural laws, includes simple mathematical analyses and experimental documentation, offers the advantages of easy installation (even for existing structures) and maintenance has considerably lower cost compared to conventional systems for the seismic protection of structures.
Degree
thesis:*- Grantor dc:publisher
- University of Patras
- Year dc:date
- 2010
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Papastylianou, Panagiotis
- Παπαστυλιανού, Παναγιώτης
Subjects
dc:subject × 18Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/26666