University of Patras
Ανάπτυξη πολυμερικών ηλεκτρολυτών για εφαρμογές σε πολυμερικές κυψελίδες καυσίμου (PEMFC)
Abstract
dc:descriptionAmong the different environmentally friendly new technologies of power generation, polymer electrolyte membrane fuel cell (PEMFC) is one of the most promising candidates for use in vehicular, portable and residential applications. Operation above 100 ºC has many advantages such as increased reaction rate, flexibility to use not so pure hydrogen as fuel and/or use of lower loading of the expensive metal (Pt) on the electrode resulting in low cost.The heart of a PEM fuel cell consists of the electrodes and the polymer electrolyte. The latest years, great efforts have been devoted by finding new electrolyte materials of particular properties for optimization of the quality and the performance of high temperature PEMFC. The ideal polymer electrolyte should exhibit long term durability, good mechanical properties, high thermal/chemical and oxidative stability and high ionic conductivity which depends on the ability to be doped with a strong acid. Our approach towards the development of polymer electrolytes that possess the required properties is mainly based on the introduction of side polar groups onto aromatic polymeric chains. Aromatic polyethers are attractive polymeric backbones because of their high thermal/chemical stability and good mechanical properties. The introduction of side polar groups has as target the incorporation of groups able to interact with H3PO4 acid and thus increasing the retention of strong acid, leading to the desired high ionic conductivity. In this thesis, three new monomeric diols with two side pyridine or pyrollidine groups were synthesized. High temperature polycondensation copolymerization of the above with different aromatic difluorides and different commercial or not diols resulted in homopolymers and copolymers with two or three repeating units. The copolymers were soluble in common organic solvents with high molecular weights and excellent film forming ability. These copolymers were characterized with conventional techniques and showed high thermal and oxidative stability and high Tg values. Furthermore, their high ability to be doped with phosphoric acid, an essential prerequisite for desirable ionic conductivity values, was examined. Blends between the synthesized copolymers and other copolymers were prepared and resulted in miscible blends with excellent mechanical, thermal properties, oxidative stability and good ability to be doped with H3PO4. The majority of the studied materials combined the desired properties for their use as polymer electrolytes in high temperature PEM fuel cells. Following synthesis of new copolymers, blend preparation and characterization of their properties some of these materials were chosen for application in PEM fuel cells. Among the different polymer electrolytes that have been synthesized, PPy(50)coPΕS and dPPy(x)coPPy(y)coT(z)S copolymers were further chosen for the membrane electrode assembly (ΜΕΑ) preparation and study under (5x5 cm2) fuel cell’s conditions. Apart from the standard electrochemical characterization, other parameters that could influence the resistances and the behavior and performance of the cell were also studied. The effect of the H3PO4 content of the electrodes on the electrochemical electrolyte/electrode interface was thoroughly studied as well as the influence of O2 and H2O partial pressure in the electrokinetic behavior of the interface. Finally, long term tests in steady and dynamic operation were also performed, proving the good mechanical stability and long term chemical stability of these MEAs under continuous operation and cycling conditions for use in high temperature PEM fuel cells.
Degree
thesis:*- Grantor dc:publisher
- University of Patras
- Year dc:date
- 2009
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Geormezi, Maria
- Γεωρμεζή, Μαρία
Subjects
dc:subject × 12Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/26756