University of Patras
Νέα πολυμερικά χρωμοφόρα και πολυμερικοί ηλεκτρολύτες για εφαρμογή σε ηλιακές κυψελίδες
Abstract
dc:descriptionThe research of many scientific groups around the world today is focused on the technology of renewable energies and mainly the solar energy conversion. The devices that are able to convert the energy of the sun into electricity are known as photovoltaic or solar cells. The basic idea, on which this technology is based on, is the photosynthetic procedure occurring in nature by plants, thus producing electrons by light inducing electrochemical procedures, occurring on the biological chains of the chloroplasts. The three basic categories of solar cells, based on the photoactive material used, are the inorganic, organic and hybrid solar cells. This thesis is focused on the synthesis and characterization of photo-sensitive materials that could be applied in hybrid solar cells as the chromophoric sensitizer and especially in Dye Sensitized Solar Cells (DSSCs) or as most commonly referred to as Grätzel type solar cells. The selected approach in this thesis, is the comparison of the classical sensitizers used today (monomeric type metal complexes of ruthenium ions with carboxy functionalized bipyridine or terpyridine ligands) with polymeric or copolymeric sensitizers (metallopolymers of ruthenium ions with bipyridine or terpyridine ligands and in some cases, in combination with poly(ethylene oxide) segments.In the first chapter of this thesis, the synthesis and characterization of homopolymers of terpyridine units having carboxylic ends through the ATRP (Atom Transfer Radical Polymerization) technique, is presented. The produced homopolymers exhibit quite low values of polydispersity, thus proving the successful ATR polymerization. Additionally, alternating copolymers of the AB type, combining terpyridine macromonomers and fluorene segments, were produced via polycondesation reaction. This approach was performed in order to improve the optical characteristics of the terpyridine polymers. The following step was the formation of metallo-polymers having complexated ruthenium ions, using the above mentioned homo- and copolymers having free terpyridine units, as precursors. This procedure would enable the final hybrid materials to be applied as sensitizers in DSSCs. The complexation reaction was easily feasible by taking advantage of the metal to ligand complexation chemistry. The unit preferred for this complexation was a di(dodecyloxy) functionalized terpyridine/ruthenium monocomplex, which according to published results would entitle the final hybrid materials with good solubility properties. Following a parallel route, vinyl-complexes of vtpy-Ru(II)-tpy type, having carboxylic ends, were produced. These vinyl complexes were polymerized through the FRP (Free Radical Polymerization) technique or even similarly copolymerized with vinyl poly(ethyleneoxide) macromonomers, targeting the incorporation of the sensitizer and the electrolyte used in DSSCs in a single polymer chain. In a final approach, monomeric metal complexes of the tpy-Ru(II)-tpy type, mono- or di-carboxylic functionalized were produced. Moreover, in order to study the self-organization ability of tpy-Ru(II)-tpy type metallo-polymers, the complexation of terpyridine homopolymers using mono-, di- and tri-(dodecyloxy) functionalized terpyridine/ruthenium monocomplex, was performed. The final metallo-polymers produced, were studied in respect to their self-organization ability by means of S/W AXS (Small/Wide Angle X-Ray Scattering) and TEM (Transmission Electron Microscopy).All the above metal-complexes synthesized, were easily soluble in common organic solvents, despite their high metal loading and were thus characterized for their chemical structure and optical properties by means of 1Η NMR, GPC techniques and UV-Vis and photoluminescence spectroscopy respectively. The data obtained by this characterization, revealed significant changes of the physicochemical properties of the respective materials in contrast to the precursor polymers and monomers.In the second chapter, the synthesis of a novel tris-bipyridine ruthenium complex [Ru(vbpy)(bpy)2(PF6-)2] is presented. In consequence it was polymerized via the ATRP technique, a pioneering procedure according to literature. The use of a carboxylic functionalized initiator would enable the final polymeric complex to be applied as a sensitizer in DSSCs, while in another approach a chromophoric di-functional initiator would improve the metallo-polymer’s optical properties. In that respect, homo- and triblock metallo-polymers were produced, exhibiting excellent solubility properties, despite their high metal loading. This vinyl complex [Ru(vbpy)(bpy)2(PF6-)2], was also copolymerized via the FRP technique with units having electron or hole transport ability, like oxadiazoles, quinolines and carbazoles respectively. Thus, copolymers of donor/acceptor architecture were produced, exhibiting good solubility properties in common organic solvents, regardless of the molar ratio of the respective commonomers used. All homo- and copolymers produced in this chapter were characterized for their chemical perfection and optical properties by means of 1Η NMR, GPC, UV-Vis and photoluminescence spectroscopy respectively.In chapter three, the modification of carbon nanotubes, single and multi walled (SW-, MW-CNTs/ Single-, Multi Walled-Carbon Nano Tubes) with monomeric or polymeric tpy-Ru(II)-tpy complexes, was attempted. This work was performed in order to take advantage of the fine mechanical and electrical properties of the CNTs. The approaches attempted for these modifications were the “grafting to” and “grafting from”. Concerning the “grafting to” approach, a bromomethyl functionalized metal complex of the tpy-Ru(II)-tpy type was prepared, which was afterwards attached onto the SWCNTs surfaces using the Atom Transfer Radical Addition Reaction (ATRA). For the “grafting from” approach, ATRP initiator sites were prepared onto the SWCNTs surfaces. A vinyl-terpyridine monomer was then polymerized via the ATRP technique, followed by the complexation of the free terpyridine units of the polymer’s chains with a di(dodecyloxy) functionalized terpyridine/ruthenium monocomplex.In a parallel project, the “grafting to” method was applied in order to modify MWCNTs surfaces with tpy-Ru(II)-tpy complexes. In contrast to the aforementioned “grafting to” approach, the addition reaction via diazonium chemistry was utilized. In that respect, amino terminated tpy-Ru(II)-tpy complexes were prepared, that modified the CNTs surface in a simple one pot addition reaction.The final nano-hybrid materials were characterized with the commonly used techniques for CNTs like thermogravimetric analysis, UV-Vis and FT-Raman spectroscopy. The total data acquired by the analyses, proved the successful and at the same time sufficient modification of SW and MWCNTs with tpy-Ru(II)-tpy type complexes. The modified hybrid CNTs produced, were easily dispersible in common organic solvents like DMF, THF, CHCl3 and CH3CN, making thus a future technological application feasible.The existence of carboxylic groups on the hybrid metal-polymers and monomers of chapters 3 and 4 makes them possible applicants as sensitizers in DSSCs. Their application in single solar cells had as a result the observation of the photovoltaic effect and a power conversion efficiency of 0.006%. Moreover the copolymers produced in chapter 4 presenting electron donor/acceptor architecture and light emission at the red region of the visible spectra, were applied in LEDs. Their efficiency reached a maximum of 0.1%, which is relatively higher compared to the published performances of similar devices.
Degree
thesis:*- Grantor dc:publisher
- University of Patras
- Year dc:date
- 2009
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Pefkianakis, Eleftherios
- Πευκιανάκης, Ελευθέριος
Subjects
dc:subject × 18- Ηλιακές κυψελίδες
- Πολυμερή
- Μεταλλικά σύμπλοκα
- Νανοσωλήνες άνθρακα
- Οπτικές ιδιότητες
- Φασματοσκοπικός χαρακτηρισμός
- Μορφολογικός χαρακτηρισμός
- Solar cells
- Polymers
- Metal comlexes
- Carbon nanotubes
- Optical properties
- Phasmatoscopic characterization
- Morphological characterization
- Φυσικές Επιστήμες
- Χημεία
- Natural Sciences
- Chemical Sciences
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/26772