National Technical University of Athens (NTUA)
Πειραματική υποστήριξη σχεδιασμού συνιστωσών αεριοστροβίλων
Abstract
dc:descriptionThe present work is aiming to investigate experimentally how to support compressor and turbine design. For this reason design practices related to the stable operation of compressors and turbines and to the unstable operation of compressors are studied. The adopted methodology follows two main directions. Specifically: • It is experimentally investigated how real operating conditions may affect the operation of a compressor or a turbine. • In particular for the case of compressors the use of active flow control aiming to extend the compressor stable operating range is investigated experimentally. This can lead to increased performance and reduction of volume and weight. The most notable novel conclusions reached during the present work are the following: • An effective way to take into consideration non uniformities of the flow at the compressor inlet is by applying the concept of parallel compressors. The compressor wheel may be designed through and optimization process taking into account the inlet flow field at all peripheral positions. Subsequently, an asymmetric diffuser can be designed, for optimal operation at the nominal operating point. The optimization of both components can be performed on the meridional plane. By following this technique compressor stages can be optimally adapted to existing industrial facilities. • It is established that the extension of the compressor stable operating range is directly related to the injected air momentum. Assuming the compressor operating point on the verge of the unstable operating range it is found that this point is moving towards lower mass flow rate under the influence of injection. By expressing this displacement as a percentage of the compressor mass flow rate at that operating point without the influence of air injection and correlating it with the ratio between injected and free stream momentum a very strong correlation is established. • It is demonstrated that judging by energy requirements using more injection nozzles is advantageous. • Detailed flow field measurements under the influence of injection provide reveal its effects diffusion factor redistribution and stable operation maintenance for higher values of the diffusion factor. • A novel method for measuring turbine efficiency when heat transfer between the turbine and the environment is significant is established. • The design construction and commissioning of an experimental facility for testing turbochargers is described.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2009
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Kefalakis, Michail
- Κεφαλάκης, Μιχαήλ
Subjects
dc:subject × 24- Συμπιεστής
- Στρόβιλος
- Έγχυση αέρα
- Ενεργός έλεγχος ροής
- Σχεδιασμός
- Ανομοιομορφία εισόδου
- Συχνότητα παλμών
- Μετάδοση θερμότητας
- Ασταθής λειτουργία
- Compressors
- Turbine
- Air injection
- Active flow control
- Design
- Inlet non - uniformity
- Pulse frequency
- Heat transfer
- Unstable operation
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Πολιτικού Μηχανικού
- Επιστήμη Μηχανολόγου Μηχανικού
- Engineering and Technology
- Civil Engineering
- Mechanical Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/26864