Technical University of Crete (TUC)
Προσομοίωση της κατεργασίας οδοντώσεων με φραιζάρισμα με κύλιση και διερεύνηση των τεχνολογικών της παραμέτρων
Abstract
dc:descriptionEvery high performance gear transmission module is composed of involute gears. External involute gears can be manufactured with a series of methods, the most widely applied of which being gear hobbing. The prediction of the quality of the produced gear and the determination of the cutting forces involved are of great importance. The present thesis introduces a novel simulation code called HOB3D that simulates the process of gear hobbing. This code can simulate the complex movements involved in gear hobbing with the best available accuracy, which is achieved by embedding the developed algorithm in a commercial CAD environment. The simulation code calculates the solid gap and non-deformed chip geometries. The latter where used to calculate the total cutting forces as well as the cutting forces in every cutting edge involved in the cutting process using Kienzle Victors’ equations. These equations predict the cutting forces in relation to the non-deformed chip geometry dimensions in the rake face of the cutter. The results of the model have been verified either with the use of analytic equations and experimental results, in the case of the profile of the produced gear gap, or with the use of experimental results found in the references, regarding the cutting forces. HOB3D is also equipped with a fully functional user friendly graphical user interface where the user can enter the simulation data, keep track of the simulation course, view and analyze the results. Moreover, a finite element program was used to simulate the flow of the chip in the confined space of a gear gap, as well as the determination of the developed cutting forces. Appropriate pre-processors were developed in order to prepare the data taken from HOB3D for an easier and error proof insertion in the finite element program selected. In order to verify the results of the model, the trajectories that the cutter forms where compared to the ones created by ΗΟΒ3D. The cutting forces that were calculated were also verified with the HOB3D corresponding results. Finally, the effect of the different machining data on the resulting cutting forces was studied. Parameters like the module and the number of teeth of the produced gear, the number of hob columns and origins, and the axial feed was studied with respect to the maximum and minimum developed cutting force components.
Degree
thesis:*- Grantor dc:publisher
- Technical University of Crete (TUC)
- Year dc:date
- 2012
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Ταπόγλου, Νικόλαος
- Tapoglou, Nikolaos
Subjects
dc:subject × 14- Κατεργασίες κοπής
- Φραιζάρισμα με κύλιση οδοντώσεων
- Συστήματα CAD
- Μέθοδος πεπερασμένων στοιχείων
- Manufacturing
- Gear hobbing
- CAD systems
- Finite element method
- Engineering and Technology
- Mechanical Engineering
- Materials Engineering
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Μηχανολόγου Μηχανικού
- Μηχανική Υλικών
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/26878