Aristotle University Of Thessaloniki (AUTH)
Dosimetric characterization of materials with applications on archaeometry and retrospective dosimetry
Abstract
dc:descriptionThe purpose of this work is to investigate the influence of thermal quenching in quartz luminescence for the application of quartz in dating of archaeological and geological samples. Additionally, it supports to bring precise results when quartz is used for accidental and retrospective dosimetric applications. The information delivered in the present work corresponds to the theoretical study of thermal quenching as well as experimental study on the natural and artificial quartz samples via heating rates within the range 0.25 to 20K/s. The experimental is concentrated on determination of prevalent pair of thermal quenching parameters. It was followed to by the attempt of reconstruction of thermally quenched glow curve. This dissertation is organized in the following manner. Chapter 1 entitled basic introduction of interaction of matter with radiation especially with photon, neutron and charged particles. Chapter 2 entitled basic concepts of TL model, discussion of glow curve, expressions and tools used in the context of thermally stimulated luminescence (TL). This chapter can be read independently. The chapter is opened with a discussion of shapes of TL associated with a trap center and a recombination center. It includes an analysis developed to determine the trapped charge carrier distribution using TL techniques. Some of its basic terminologies of TL are attached in the title appendix after references.The theoretical aspect of thermal quenching which exist in all TL dosimeter is well explained with the help of different models of thermal quenching. The mechanism of thermal quenching described in different models in the existing literature is summarized. The thermal quenching in quartz is also discussed in brief. Chapter 3 gives detail information about quartzes and their luminescence properties. This chapter can be read independently to have a general view of luminescence of quartz. The luminescence properties in quartz are attributed by creation of defects due to irradiation. In this context various defects presents in quartzes are presented on the basis of available literature on quartz. The various fields where luminescence properties of quartzes are applicable are highlighted. The application of quartz in various sectors archeology (dating and authenticity testing), geology, accidental dosimetry and retrospective dosimetry are briefly discussed. Chapter 4 deals for experimental equipment, its operation mode, various units of Risø systems; irradiation chamber (source unit 90Sr), heating system, light detection system and function of all the other necessary additional adjustments like nitrogen flow (for inert atmosphere). The criteria for selecting filters and sample preparation are also included in this chapter. The chapter 5 is based on numerical simulation of influence of thermal quenching in various TL parameters which can be evaluated from experimental glow curve of quartz; peak height, peak integral and methods of evaluation of TL trapping parameters. It also provides valuable information for a) evaluation of thermally quenching parameters (W, C) b) shift of peak maximum temperature (due to thermal quenching), c) the influence on the symmetry factor d) the kinetics order of the glow-peak and e) influence of thermal quenching on the activation energy via different methods of evaluating trapping parameters. The chapter 6 corresponds to investigation of thermal quenching parameters, C and W, of quartz and their single pair of prevalence values of W and C. Searching of prevalent values of the thermal quenching parameters i.e. the activation energy W and the dimensionless parameter C from the quartz samples of various origins. The observations of influence of thermal quenching parameters were analyzed from quartz samples annealed at different temperature. One new set of thermal quenching parameters were observed which we named as intermediate group of thermal quenching parameters. However, the prevalence pair of thermal quenching parameters of quartz was observed within the narrow range of values of W and C. The evaluation of thermal quenching parameters from natural signals of various quartzes was not able to depict particular prevalent pair of thermal quenching parameters due to their positions in vary high temperature region. Finally the prevalent pair of thermal quenching parameters were selected which satisfy the entire glow peaks of glow curves. These details will be the crucial in the applied fields of TL and OSL such as dating, authenticity testing, archaeological and geological study. The chapter 7 includes the reconstruction attempt of thermoluminescence glow curve of quartz samples. It depicts the reconstruction of thermoluminescence glow curve of quartz which deserves different sets of thermal quenching parameters. The consistency of the reconstructed thermoluminescence glow peaks was observed by retransforming to quenched glow peaks. It was followed by separate analysis to observe consistency in their shape of glow peaks (in peak height, glow peak area and symmetry factor of glow peak) and trapping parameters with that of experimental quenched glow peaks. This study exhibit the reconstruction attempt was successful to provide alternative way to evaluate trapping parameters of thermoluminescence glow curve.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2011
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Subedi, Bhagawan
Subjects
dc:subject × 12Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/27043