Aristotle University Of Thessaloniki (AUTH)
Σύνθεση και μελέτη ιδιοτήτων οδοντιατρικών νανοσύνθετων υλικών πολυμεθακρυλικής μήτρας
Abstract
dc:descriptionIn the present dissertation, the synthesis and the study of properties of dental light-cured resin nanocomposites were occured. Specifically, three sets of experiments took place: (a) at first, the effect of the structure of the silane coupling agent on properties of resin nanocomposites was studied. These nanocomposites consist of a Bis-GMA/TEGDMA (50/50wt/wt) matrix, fumed silica nanoparticles (Aerosil OX50) as filler, which are silanized with the silanes or their blends: (i) MPS, (ii) OTMS, (iii) UDMS, (iv) MPS/OTMS (50/50 wt/wt) και (v) UDMS/OTMS (50/50 wt/wt). It is pointed out that the silane UDMS was used for this aim for the first time. (b) Secondly, the effect of the amount of the silane coupling agent on properties of resin nanocomposites was evaluated. These nanocomposites consisted of a Bis-GMA/TEGDMA (50/50wt/wt) matrix, fumed silica nanoparticles (Aerosil OX50) as filler, silanized with the silanes: (i) MPS και (ii) UDMS. For each silane, the amounts of silane were: 1.0 – 2.5 – 5.0 – 7.5 - 10 wt-% relative to silica. (c) Thirdly, the influence of the size of the filler particles on properties of resin nanocomposites was determined. These nanocomposites consisted of a Bis-GMA/TEGDMA (50/50wt/wt) matrix, fumed silica nanoparticles with different size (Aerosil ΟΧ50, Aerosil 90, Aerosil 130, Aerosil 150, Aerosil 300) as filler, silanized with the silanes: (i) MPS and (ii) UDMS. In all cases, silica nanoparticles were silanized with silane or blends of silanes and then they were identified by FTIR spectroscopy and thermogravimetric analysis. The silanizated silica nanoparticles were mixed with the dimethacrylate matrix and the unpolymerized material was irradiated with visible light. Degree of conversion of light cured composites was determined by FT-IR analysis. It was also determinated the static and the dynamic mechanical properties of composites, immediately after light-cured and after storage of composites in water, sorption characteristics and volumetric change of materials after their storage in water or ethanol/water solution 75 vol-%. Finally, thermogravimetric analysis has been used for the study of the thermal stability of composites. The silane-coupling agent structure used for the silanization of silica nanoparticles has an effect on properties of composites. The amount of silane-coupling agent affect the orientation of the silane molecules relatively to the silica surface and therefore it affects the properties of corresponding composites. There is a optimum amount of silane, which is not the same for all the properties. Finally, the properties of composites are dependent on the filler particles size.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2010
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Karabela, Maria
- Καράμπελα, Μαρία
Subjects
dc:subject × 20- Οδοντιατρικά σύνθετα υλικά
- Συζευκτικό μέσο
- Ρόφηση
- Φωτοπολυμερισμός
- Κάμψη 3-σημείων, αντοχή σε κάμψη
- Δυναμικές μηχανικές ιδιότητες
- Βαθμός μετατροπής
- Θερμοσταθμική ανάλυση
- Dental composites
- Silane coupling agent
- Sorption
- Photopolymerization
- 3-point bending, flexural strength
- Dynamic mechanical properties
- Degree of conversion
- Thermogravimetric Analysis (TGA)
- Φυσικές Επιστήμες
- Χημεία
- Natural Sciences
- Chemical Sciences
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/27119