Back to search

University of Thessaly (UTH)

Αριθμητική προσομοίωση της συμπεριφοράς ινοπλισμένου τσιμεντοκονιάματος για δομικές εφαρμογές

Abstract

dc:description

The objective of the present dissertation is the numerical simulation of the behaviour of a specific type of fibre-reinforced cementitious matrix (FRCM), which is consisted of a high-strength cementitious matrix in which hooked-end steel fibres are added. The study is realized with the help of the Finite Element Method (FEM). Τhe target is the development of efficient and reliable numerical models for the simulation of each problem treated in the present study. First, the behaviour of the composite material is studied through the pull-out test of a single hooked-end steel fibre from the high-strength cementitious matrix and an accurate three-dimensional F.E. model is formulated. For the formulation of the model, the experimental results obtained by a series of pull-out tests of straight steel fibres from the cementitious matrix are utilized. Then the results obtained by the simulation model of the pull-out of the hooked-end steel fibre are compared to the respective experimental ones. The three-dimensional numerical model is also used for the simulation of the pull-out behaviour of inclined fibres, as well as of fibres with different geometries. Finally, a simpler but reliable two-dimensional numerical model is proposed. Then, the bending tests of different types of FRCM beams are numerically simulated. More specifically, the bending behaviour of a FRCM without conventional reinforcement and a similar one with longitudinal and transverse reinforcement is numerically investigated. For comparison reasons a conventional RC beam is also numerically simulated. Moreover, the bending behaviour of RC beams strengthened by relatively thin FRCM jackets is studied. A new method for the numerical simulation of the composite material is proposed. The validity of the proposed methodology is established by comparing the numerical results with the corresponding experimental ones. Finally, a technique is proposed for the efficient simulation of the under study FRCM in common structural analysis programs. The proposed methodology is then applied in an example where the structural members of an existing RC building are strengthened by the FRCM jackets and some practical solutions are given for the problem of consideration of the load-carrying capacity reduction of the strengthened member, due to the loss of the contribution of the fibres.

Degree

thesis:*
Grantor dc:publisher
University of Thessaly (UTH)
Year dc:date
2012

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Georgiadi-Stefanidi, Kyriaki
  • Γεωργιάδη-Στεφανίδη, Κυριακή

Subjects

dc:subject × 22

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/27355

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Georgiadi-Stefanidi, Kyriaki; Γεωργιάδη-Στεφανίδη, Κυριακή. Αριθμητική προσομοίωση της συμπεριφοράς ινοπλισμένου τσιμεντοκονιάματος για δομικές εφαρμογές. University of Thessaly (UTH), 2012. http://hdl.handle.net/10442/hedi/27355