Institutes outside Greece
Relationship between processing, structure and tribological behaviour of carbide reinforced plasma sprayed coatings
Abstract
dc:descriptionTungsten carbide cobalt (WC-CO) thermal sprayed coatings are used as wear resistant coatings but show disadvantages due to:i.Decomposition and oxidation of WC at temperatures above 450 °C; andii.Limited corrosion resistance of the WC-Co systemThe objective of the current Ph.D. thesis is the design and development of wear resistant coatings based on titanium carbides (TiC), in order to replace WC-Co coatings. For this reason, TiC-based coatings have been designed, sprayed in atmospheric and low pressure conditions and were evaluated with tribological tests at room temperature and at 550 °C.NiCr alloy has been selected as the metal matrix and two approaches were followed for the development of the new materials:i.Mo and Fe-Al-Ti have been added in the NiCr metal matrix in order to increase its wear resistance, but also to increase its wetting capability for the carbides.ii.Solid solutions of titanium-tantalum carbides [(Ti,Ta)C] were used to reinforce the matrix, in order to increase the wetting of the carbides by the matrix, but also to increase the wear resistance of the carbide phase.The coatings have been classified based on the results of the tribological tests. NiCr-TiC and WC-Co coatings have been used as reference materials. Coatings with NiCrMo or NiCrFeAlTi as metal matrix showed better structure and higher wear resistance than the NiCr-TiC coatings. This was also the case for the coatings that have been reinforced with (Ti,Ta)C. Especially the NiCrFeAlTi-TiC coatings showed very good wear resistance due to the formation and matrix strengthening with the [(Ti-Ni-Cr)C] and Ni3(Al,Ti) phases. It was presented in the thesis that the contribution of the active wear mechanisms (abrasion, adhesion and surface fatigue-induced fracture wear) is influenced by the carbide-matrix interface strength.At a second stage, the coatings have been evaluated under fretting wear conditions at room temperature and at 550 °C. The results showed that the modifications of the initial NiCr-TiC material had again a positive influence on the systems’ tribological behavior. The NiCrFeAl-TiC coating showed the best fretting wear results, while the WC-Co reference material fragmented at high temperature with no detrimental result, however, under the testing conditions used.The structure of the coatings has been studied thoroughly and the presence of oxides in the atmospheric sprayed coatings influenced negatively the coatings’ wear resistance.The crucial parameters that should be considered for developing high wear resistant TiC-based coatings have been indicated in this Ph.D. thesis and new ideas have been presented for the development of future wear resistant thermal sprayed coatings as alternatives to WC-Co.
Degree
thesis:*- Grantor dc:publisher
- Institutes outside Greece
- Year dc:date
- 1995
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Οικονόμου, Σπυρίδων
Subjects
dc:subject × 20- Επικαλύψεις ψεκασμού πλάσματος
- Ενισχυτικά καρβίδια
- Αντοχή στην τριβή
- Φθορά λόγω παλινδρομικής κίνησης
- Δοκιμές φθοράς τριβής γεωμετρίας ακίδας-σε-δίσκο
- Τριβολογία
- Επιμεταλλώσεις
- Δομή επικαλύψεων
- Plasma sprayed coatings
- Carbide reinforced
- Wear resistance
- Fretting wear
- Pin-on-disk tests
- Tribology
- Metallic coatings (copper, CoNiCrAlY alloy, titanium
- Coatings structure
- Επιστήμες Μηχανικού και Τεχνολογία
- Μηχανική Υλικών
- Engineering and Technology
- Materials Engineering
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/27405