National Technical University of Athens (NTUA)
Συμβολή στη μελέτη της ηλεκτροστατικής εκφόρτισης
Abstract
dc:descriptionThe aim of this PhD thesis is to focus on the study of the electrostatic discharge current, and to highlight the less known and more poorly measured parameters through human-to-metal electrostatic discharge experiments. This thesis also aims at the critique and improvement of the mathematical expressions of the discharge current via methods developed by the author, with real experiments data reference. Finally, the synthesis of passive circuits generating the current measured in real electrostatic discharge experiments is a main goal. The measurements of this thesis show that the rise time of the electrostatic discharge can be, not only much smaller than the one defined in the IEC 61000-4-2 Standard (especially for very small charging voltages), but also, smaller from the findings of other researchers. In general, the parameters of the electrostatic discharge current present different values than the ones defined in the Standard, while their behavior, regarding different charging voltages, is also different from the Standard’s, which approaches the phenomenon in a rather theoretical and general manner. What is arbitrary enough is that, certain observations made on the electrostatic discharge current under specific conditions are expanded, in the same Standard, to present definitions for the whole phenomenon. A method was developed for the evaluation of the discharge current parameters based on the calculation of the uncertainties. Additional measurements under different approaching speeds are carried-out, and presented. The behavior of important electrostatic discharge current parameters versus speed and arc length is examined and presented. Numerical methods, that were developed in this thesis from scratch and others, that were modified specially for its needs, resulted in improved mathematical expressions, corresponding to the mathematical expression of the Standard. Also, new expressions under the form of series of exponentials are found, with experimental data reference. Both passive and active circuit synthesis methods, producing the electrostatic discharge current, are presented. They use IEC Standard’s current waveform, commercial electrostatic discharge current waveform and experimental real human-to-metal discharge data reference. The presentation of passive circuits that produce the current of human discharge, as measured in our experiments, is emphasized.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2011
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Κατσιβέλης, Παύλος
- Katsivelis, Pavlos
Subjects
dc:subject × 24- Ηλεκτροστατική εκφόρτιση
- Πρότυπο IEC 61000-4-2
- Ρεύμα ηλεκτροστατικής εκφόρτισης
- Μετρήσεις ηλεκτροστατικής εκφόρτισης ανθρώπου-μετάλλου
- Τόξο ηλεκτροστατικής εκφόρτισης
- Γενετικός αλγόριθμος
- Μέθοδος ανάκτησης κρουστικής απόκρισης
- Σύνθεση δικτύων
- Προγραμματιστικό περιβάλλον Matlab
- Προσομοίωση
- Electrostatic discharge
- IEC 61000-4-2 standard
- Electrostatic discharge current
- Human-to-metal electrostatic discharge measurements
- Electrostatic discharge arc
- Genetic algorithm
- Impulse response recovery method
- Circuit synthesis
- Matlab programming environment
- Simulation
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Ηλεκτρολόγου Μηχανικού, Ηλεκτρονικού Μηχανικού, Μηχανικού Η/Υ
- Engineering and Technology
- Electrical Engineering, Electronic Engineering, Information Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/27474