Back to search

National Technical University of Athens (NTUA)

Χημική τροποποίηση κεραμικών μεμβρανών για περιβαλλοντικές εφαρμογές

Abstract

dc:description

The aim of the work was to suggest a novel way of cleaning industry wastewater using ceramic membranes. The novel introduced technologies are a) Hybrid ceramic substrate/alginate membranes for heavy metal removal b) Photocatalytic ultrafiltration/nanofiltration membranes for simultaneous retention and degradation of organic mater. For the development of the Hybrid alginate membranes, the sorbent was stabilized in the pore structure of the membranes, turning the multi-stage wastewater cleaning into a one-step procedure. The stabilization took place either through natural impregnation of the alginic acid into the membranes followed by crosslinking or through chemical bonding oh the alginate onto the ceramic surface using silane molecules. The developed through natural impregnation hybrid membranes lost 72% of their alginate load during the 1st experimental run, although the chemically developed ones only the 46%. The last (sample Al/5/s/C9/OH7/alg/CF, exhibited retention factor almost double (180%) of that of the clean Al/5 substrate, when collecting the first 100mL permeate and up to 120% for 800mL permeate. It also retained its efficiency after the acidic regeneration of the membrane. With the purpose to develop composite TiO2 photocatalytic nanofiltration (NF) membranes for organic pollutant decomposition, two different chemical vapour deposition (CVD) based innovative approaches were applied. The first method involved pyrolytic decomposition of titanium tetraisopropoxide (TTIP) vapor and formation of TiO2 nanoparticles through homogeneous gas phase reactions and aggregation of the produced intermediate species. The grown nanoparticles diffused and deposited on the surface of asymmetric NF alumina membrane tubes. The second proceeded through chemical vapour layer-by-layer deposition of TiO2. This technique comprised chemisorption or physisorption of the TTIP vapour and a subsequent oxidative treatment in order to promote heterogeneous surface reactions and generate new adsorption sites for the accomplishment of the successive adsorption/surface reaction steps. The CVD reactor allowed for online monitoring of the carrier gas permeability during the treatment, providing a first insight on the pore efficiency and thickness of the formed photocatalytic layers, so thin TiO2 deposits were developed on both membrane sides without sacrificing the high yield rates. Important innovation was also introduced in what concerns the photocatalytic performance evaluation. The membrane efficiency to photo degrade typical water pollutants, was evaluated in a continuous flow water purification device, applying UV irradiation on both membrane sides. Ca alginate polymer fibers were developed to effectively disperse and stabilize an efficient photocatalyst in their matrix. The biopolymer/TiO2 fibers were prepared and tested either in the hydrogel non-porous form or in the highly porous aerogel form prepared by supercritical-CO2 drying. Batch photocatalytic experiments showed that the hybrid fibers, exhibited high photocatalytic degradation rate which was not only faster than that of their non-porous analogues but also of the bulk TiO2 powder. The composite alginate/TiO2 porous fibers were combined with CVD composed TiO2 membranes in a continuous flow photocatalytic/membrane ultrafiltration water treatment process for examining the capacity of the stabilised photocatalyst to inhibit the formation of toxic retentate condensates, which, proved 84% lower.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2012

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Athanasekou, Chrysoula
  • Αθανασέκου, Χρυσούλα

Subjects

dc:subject × 20

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/27493

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Athanasekou, Chrysoula; Αθανασέκου, Χρυσούλα. Χημική τροποποίηση κεραμικών μεμβρανών για περιβαλλοντικές εφαρμογές. National Technical University of Athens (NTUA), 2012. http://hdl.handle.net/10442/hedi/27493