Aristotle University Of Thessaloniki (AUTH)
Ηλεκτροχημική απομάκρυνση των νιτρικών και της αμμωνίας από υδατικά διαλύματα και περιβαλλοντικά δείγματα
Abstract
dc:descriptionIn the framework of this doctoral thesis, the reduction of nitrate on bismuth electrodes was initially studied. The rate of the reduction was very high and the main products were nitrogen, nitrous oxide, ammonia and nitrite, with selectivity 58-63%, 7-22%, 3.8-19% and 1.8-2.6% respectively. The current efficiency varied from 80%, at -1.8 V to 20% at -2.6 V. It was found that the reduction of nitrate takes place through an autocatalytic mechanism, in which key-role plays the nitrous oxide. The rate of the autocatalytic reaction was up to ~50 times higher than that the electrochemical one. Although autocatalytic mechanisms have been often proposed in literature for the reduction of nitrate in acidic solutions, it is the first time that such behavior is noticed in alkaline solutions. Both voltametric measurements and electrolytic experiments showed that the rate of the reduction on Sn, Bi, Al, In, Pb, Zn and Cu depends only on the potential of zero charge (pzc) of each metal. To a smaller extent, the rate is influenced by the hydrophilicity of the metal. This was attributed to the fact that under our experimental conditions, the reduction took place in long distance from the electrode surface, which is at least equal to the outer Helmoholtz plane (oHp). All the metals used undergo cathodic corrosion during the electrolysis the extent of which depends on the cathodic potential and the nature of the metal. The cathodic corrosion was mainly attributed to the decrease of the free surface energy of the metal with the increase of the negative potential. During the electrochemical reduction of nitrate two intermediates are formed; hyponitrite acid (Η2Ν2Ο2) and nitramide (ΝΗ2ΝΟ2), which were determined by ion chromatography and gas chromatography – mass spectroscopy respectively. Nitramide possibly plays a key-role in the mechanism of nitrogen formation. The electrochemical oxidation of ammonia on various anodes was studied, in order to convert it into nitrogen gas. It was found that it can be performed on DSA(Cl2) in the potential region where the oxygen evolution due to the water electrolysis takes place in parallel. The by-products are small amounts of Ν2Ο and traces of nitrate. The disadvantages of those anodes are the low current efficiency (3-5%) and the low rate. The electrochemical reduction of nitrate from simulated solutions of low-radioactivity nuclear wastewaters was also studied under constant current electrolysis. At 450 mA/cm2, N2, N2O and ΝΗ3 were the main products having selectivity 72, 18 and 12% respectively. The current efficiency was 80%, when 99% of the initial nitrogen had been removed. The energy consumption for the removal of 1 g of nitrogen was 100 Wh at 450 mA/cm2. The electrochemical removal of nitrate from nuclear wastes by this method offers some advantages in comparison with other commercial methods such as higher current efficiency, rate and selectivity to nitrogen. It should be noted also that this method does not influenced by the presence of chromium in the solution.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2009
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Δόρτσιου, Μαρία
- Dortsiou, Maria
Subjects
dc:subject × 20- Νιτρικά
- Αυτοκατάλυση
- ΒΙΣΜΟΥΘΙΟ
- Πυρηνικά απόβλητα
- Ηλεκτροχημική αναγωγή
- Οξείδωση αμμωνίας
- Nitrate
- Autocatalysis
- BISMUTH
- Nuclear wastes
- Electrochemical reduction
- Ammonia oxidation
- Natural Sciences
- Chemical Sciences
- Engineering and Technology
- Chemical Engineering
- Φυσικές Επιστήμες
- Χημεία
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Χημικού Μηχανικού
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/27551