National Technical University of Athens (NTUA)
Συνέργεια νανοτεχνολογίας και πολυμερισμού στερεάς κατάστασης για την αναβάθμιση πολυαμιδικών ρητινών
Abstract
dc:descriptionLinear polyamides (PA), commonly referred to as nylons®, are very important engineering thermoplastics, owing to the versatility and the satisfactory cost-performance ratio that they possess. They reflect almost 4 % of the total polymer demand, 90 % out of which is referred to PA 6.6 and PA 6. The principal end uses of polyamides are as fibers, engineering resins, films, coatings etc, with the pertinent market showing a constant increase since the mid 1980s. However, the current market status has set a new challenge to polyamides industry, with the main characteristic being the need of these materials to meet more specialized markets and cover more demanding applications. The “key” to achieve the latter lays in upgrading polyamides, together with optimizing their properties with the lower possible cost. In the direction of upgrading polyamides, as the pertinent market is confronted with the need of expanding to applications that could not traditionally meet in order to overcome the competition by other polymer resins, the challenge of synthesizing and commercializing new polyamide structures that could correspond to different and/or more demanding applications seems particularly attractive. At this point, the available solutions could be summarized in two approaches, either by modifying the materials properties by additives incorporation, or by inherently intervening to the repeat unit. Furthermore, it is desirable to combine both approaches with production process optimization, such as by applying solid state polymerization (SSP), due to the need of higher molecular weight resins, or anhydrous melt polymerization, with both techniques bypassing the use of water as a solvent with consequent cost and natural resources saving. Moreover, the latter polymerization techniques are beneficial towards polymer quality, minimizing the risk of thermal degradation. Regarding the additives incorporation approach, the research within this dissertation framework was focused on modifying one of the most commercially important polyamides, PA 6.6, by exploiting the benefits of nanotechnology, and more specifically on preparing PA 6.6-clay nanocomposites. For this purpose, the potential of preparing the pertinent structures through the in situ intercalative polymerization method was firstly assessed, towards the direction of suggesting a preparation method that is compatible with the commercial polymerization process for PA 6.6 production, i.e. the solution-melt polymerization technique. Simultaneously, the work was driven by the existing literature gap concerning the achievement of fully exfoliated nanocomposite structures through the in situ polymerization method, and an inherent interaction mechanism was revealed between the co-existing components, which controls the possibility of clays successful dispersion in polyamide matrices of diamine and diacid monomers. In the same direction of upgrading polyamides through additives incorporation, the work further focused on merging two state-of-the art technologies of polyamides industry, SSP and nanotechnology. Indeed, the application of a final stage of solid state post-polymerization is an indispensable part of high-molecular weight polyamides production, and thus a combination of SSP in PA 6.6 case, one of the most important polyamides reflecting approximately 40 % of the total polyamides demand, with nanotechnology benefits, could potentially result in polyamides suitable for special and highly demanding applications. Through this work, clays are evidenced as “multifunctional” catalysts for solid state polyamidation processes, since the combination of nanotechnology with the pertinent polymerization technique renders the production of high performance materials possible, exploiting both technologies benefits. At the same time, the kinetic enhancement owing to clay presence offers a viable solution to the most important SSP drawback, the inherently lower rates compared to melt processes. Furthermore, part of this dissertation was devoted to exploring new catalyst systems for PA 6.6 SSP, given the fundamental importance of catalysis for the pertinent polymerization process. For this purpose, a conventional additive used in this process, i.e. a phosphorous-based antioxidant is selected, due to its often presence in such reactions, but also due the incomplete knowledge of possible catalytic action of this additives family. At the same time, its combination with nanofiller is also examined, in the direction of determining their interactions with respect to the reaction rate. The goal of the study remains, as above mentioned, to reveal new “multifuctional” catalytic systems, driven towards polyamides properties enhancement, long term thermal stability, and kinetic optimization of SSP process. Indeed, the studied antioxidant is proved to be a strong PA 6.6 SSP catalyst, meanwhile counteractions between this additive and clay are detected. Finally, regarding the modification of polyamides properties -and consequently their applications- though inherently intervening to their repeat unit, part of this dissertation was focused on preparing alternative polyamide structures, and more specifically long-chain polyamides, with the aliphatic content increase being a possible solution for the expansion of these materials to applications where bridging the gap between polyamides and polyolefins is desired. For the preparation of the polyamide structures, a recent development offered by biotechnology is exploited, with the latter offering the possibility to synthesize long-chain diacids through fermentation of paraffins or fatty acids, overcoming the conventional chemical synthesis limitations. This way, a “green” approach towards long-chain polyamides production is offered, on one side owing to the use of biosynthetic monomers, and on the other side due to the applied polymerization process, which is a combination of an anhydrous melt stage and a solid state finishing. Indeed, the latter combination leads to thermal degradation-free products, simultaneously avoiding the costly use of water as solvent, as well as the high temperature profiles, with consequential environmental benefits. Concluding, the scope within this dissertation is to upgrade polyamide resins together with optimizating polymerization processes, by exploiting the benefits of nanotechnology and/or solid state polymerization. In this direction, the combination of the aforementioned technologies is for the first time studied, emphasizing on the effect of the nanofiller on the SSP process, as well as on the conventional polymerization technique applied for the commercial production of PA 6.6. Meanwhile, the interactions between the coexisting species during the polymerization processes and the nanofiller are highlighted. Furthermore, the preparation of novel long-chain polyamides is assessed, using biosynthetic monomers and exploiting the benefits of SSP.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2011
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Μπούσια, Αναστασία
- Boussia, Anastasia
Subjects
dc:subject × 20- Πολυαμίδια
- Νανοτεχνολογία
- Πολυμερισμός στερεάς κατάστασης
- Νανοσύνθετα
- Πολυσυμπύκνωση
- Διεργασίες πολυαμιδοποίησης
- Κατάλυση
- Κινητική
- Polyamides
- Nanotechnology
- Solid state polymerization
- Nanocomposites
- Polycondensation
- Polyamidation processes
- Catalysis
- Kinetics
- Engineering and Technology
- Chemical Engineering
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Χημικού Μηχανικού
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/27635