Democritus University of Thrace (DUTH)
Μηχανική συμπεριφορά και ανθεκτικότητα νέων προηγμένων νανοσύνθετων υλικών με βάση το τσιμέντο
Abstract
dc:descriptionTypical reinforcement of concrete is provided using reinforcing bars and macrofibers both of which reinforce concrete on the millimeter scale. Recently the use of microfiber reinforcement has led to significant improvement of the mechanical properties of cement based materials. However while microfibers delay the development of formed microcracks they do not stop their initiation. Crack formation in cement based materials initiates from the nanoscale where traditional reinforcement is not effective. Cracking at the nanoscale has a high impact on the durability of the matrix, for example it can favor corrosion alkali silica reaction chloride penetration and freeze thaw. This research was highly motivated by the idea of “tailoring” the concrete properties at the nanoscale so as to develop a new generation of a “crack-free material”. It is envisioned that problems which cannot be solved with existing technology can be addressed with the use of nanoscale materials and manipulation of the matrix nanostructure. The overall objective of the research is to develop new high performance cementitious nanocomposites with substantially increased mechanical properties and durability. To achieve this, the cementitious materials were reinforced at the nanoscale where cracks initiate by incorporating carbon nanotubes (CNTs) and carbon nanofibers (CNFs) as well as at the microscale by incorporating polyvinyl alcohol (PVA) microfibers. The remarkable mechanical properties of both CNTs and CNFs suggest that they are ideal candidates for the development of high performance cementitious composites. The major challenge however, associated with the incorporation of CNTs and CNFs in cement based materials is then poor dispersion. To achieve their effective dispersion a simple one step method utilizing a surfactant and ultrasonic processing was employed. This method was optimized using two critical parameters among others the effect of ultrasonic energy and the effect of surfactant to nanoscale fibers ratio. An ultrasonic energy of 2800 kJ/I and a surfactant to nanoscale fibers weight ratio close to 4.0 was found to be optimal for effective dispersion. Following the above optimal values cement based nanocomposites of conventional and high performance cementitious matrices were produced. Fracture mechanics tests were performed to investigate the effect of MWCNTs and CNFs type in conjunction with the effect of the concentration of MWCNTs and CNFs on the fracture characteristics of the nanocomposites. Scanning electron microscopy (SEM) was employed to study the morphology and the microstructure of the cementitious nanocomposites. Additionally a determination of the nanomechanical properties and the porosity of the composites was carried out through nanoindentation experiments. It was found that small amounts of effectively dispersed MWCNTs and CNFs (0.01-0.1 wt.% of cement) can significantly increase the strength and the stiffness of the cementitious matrix. In particular, lower amounts of long MWCNTs and CNFs (0.025-0.048 wt.%) provide effective reinforcement, while higher amounts (close to 0.08 wt.%) of short MWCNTs are required to achieve the same level of reinforcement. It was also found that effectively dispersed MWCNTs and CNFs provide a unique role in cement based materials. The nanoindentation results suggest that MWCNTs and CNFs can strongly modify and reinforce the nanostructure of the cementitious matrix. Compared to plain cement matrix the nanocomposites appear to have a higher amount of high stiffness C-S-H and reduced nanoporosity. The Young’s modulus of the nanocomposites as a function of MWCNT concentration was predicted using the Mori-Tanaka and the Duan et al. methods. The model predictions were compared against experimental results. It was found that the predictions from either the Mori-Tanaka or Duan et al. are in very good agreement with the experimental results. Advanced technological aspects of cement based materials have recently focused on developing high performance cementitious composites, which exhibit high compressive strengths. Such composites however, exhibit also extremely brittle failure, low tensile capacity and appear sensitive to early age microcracking as a result of volumetric changes due to high autogenous shrinkage stresses. To determine the effect of MWCNTs and CNFs on the early strain capacity of the cementitious matrix autogenous shrinkage experiments were conducted. Due to their small diameters MWCNTs and CNFs appear to specifically reduce the amount of fine pores. This phenomenon leads to the reduction of the capillary stresses, resulting in a beneficial effect on the early strain capacity of the nanocomposites. Advanced technological aspects increasingly demand higher performing cement based materials with unproved tensile strength stiffness and toughness for use in infrastructure. One objective of this Thesis was to improve all of these aspects using hybrid (ladder scale) reinforcement at the nano and the micro scale. CNFs as well as polyvinylalcohol (PVA) microfibers were used as reinforcement. The mechanical properties of the nanocomposites were investigated by fracture mechanics using notched three-point bend specimens. The distribution of the fibers and then-reinforcing mechanisms were studied using SEM. The hybridization was found to enhance simultaneously the flexural strength, Young’s modulus and toughness of the cementitious matrix. Over all the incorporation of CNFs and PVA microfibers have resulted into a stronger and tougher composite compared to the singly-reinforced composites or plain cement paste. Finally to decrease the volume of the MWCNT/aqueous/surfactant suspensions that is required in cement based materials, a method for preparing highly concentrated MWCNT suspensions, was developed. A centrifugal process that uses two different ultracentrifuge rotors, was employed to reduce the quantity of water in the suspensions. Optical absorbance spectroscopy shows that the ultracentrifugation process increases the concentration of the MWCNT suspensions by a factor of 5. Using the highly concentrated MWCNT suspensions following dilution results in nanocomposites with mechanical properties that are comparable to the performance of samples prepared using the non-concentrated suspensions. These results verify that the ultracentrifugation concentration method successfully preserves the solubility of the MWCNT suspensions without affecting the reinforcing properties of the admixture. In this manner, the ultracentrifugation concentration method may constitute an effective preparation step for large scale implementation of MWCNT admixtures.
Degree
thesis:*- Grantor dc:publisher
- Democritus University of Thrace (DUTH)
- Year dc:date
- 2012
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Metaxa, Zoi
- Μεταξά, Ζωή
Subjects
dc:subject × 20- Νανοσύνθετα υλικά με βάση το τσιμέντο
- Νανοσωλήνες άνθρακα
- Μηχανικές ιδιότητες σε νάνο και μάκρο κλίμακα
- Αυτογενής συρρίκνωση
- Υβριδικός οπλισμός σε νάνο και μίκρο κλίμακα
- Ηλεκτρονική μακροσκοπία σάρωσης
- Αιώρημα νανοσωλήνων άνθρακα υψηλής συγκέντρωσης
- Προσομοίωση μηχανικής συμπεριφοράς νανοσύνθετων υλικών
- Displacement based nanocomposites
- Carbon nanotubes and carbon nanofiders
- Nano and macroscale mechanical properties
- Autogenous shrinkage
- Hybrid reinforcement at the nano and micro scale
- Scanning electron microscopy
- Highly concentrated carbon nanotube admixture
- Prediction of the Young's modulus of the nanocomposites
- Επιστήμες Μηχανικού και Τεχνολογία
- Νανοτεχνολογία
- Engineering and Technology
- Nano-Technology
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/27665