National Technical University of Athens (NTUA)
Ανόπτηση πυριτίου με χρήση laser για τον σχηματισμό ρηχών επαφών p-n
Abstract
dc:descriptionThe main goal of this thesis, is the implementation of two emerging silicon annealing strategies for the formation of ultra shallow p-type junctions, able to fulfill the requirements for the upcoming CMOS generations, as they are imposed by the latest ITRS roadmaps. These annealing strategies are combined with state-of-art Plasma Doping implantation techniques. Careful junction engineering is necessary, in order to determine the optimum annealing conditions, so as to achieve high level of dopants electrical activation, while retaining or even eliminating the occurrence of diffusion phenomena, that could result in wide post - annealing dopant distributions.Two different types of laser, have been used, an excimer Krf laser (λ=248 nm, FWHM=20 ns), and a sealed carbon dioxide laser in the millisecond regime (λ=10.6 μm). Even though, the different wavelengths and annealing durations, result in completely different annealing effect on the silicon bulk, both approaches have been proven successful, a fact that is testified by the extensive morphological and electrical characterization of every sample, performed prior and after the irradiations . Characterization includes SIMS, TEM, AFM and four point probe sheet resistance measurements via the Van der Pauw method. Especially for the CO2 laser part, the experimental work includes the design and fabrication of an integrated laser irradiation setup, able to preheat the samples at the range of 600-6500C and to conduct real time temperature measurements, using an IR pyrometer, a process that is complicated by the very nature of the laser – Si interaction phenomena. Experimental work was supported by simulation of every step of the process, i.e. plasma implantation and laser annealing. The computational effort focused both on thermal and diffusion kinetics prediction, and resulted in significant agreement with experimental data regarding the interaction of Silicon and CO2 / Excimer lasers, using a commercially available software tool. Due to the complex dependency of the absorption coefficient from Boron concentration profile, in the CO2 case, the later should be taken into account in relevant calculations that require simultaneous solution of both thermal and dopant diffusion equations. Moreover, description of this transient process is getting more challenging as the majority of the parameters included in the heat equation, such as thermal conductivity and specific heat capacity are strongly coupled with temperature. By using surface temperature data obtained by pyrometry measurements, it was possible to calibrate and to verify the validity of the results.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2011
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Φλωράκης, Αντώνιος
- Florakis, Antonios
Subjects
dc:subject × 13Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/27736