University of Patras
Προσδιορισμός μηχανικών παραμέτρων του βραχώδους υλικού και εφαρμογή αυτών στην εκτίμηση της αντοχής και παραμορφωσιμότητας της βραχομάζας
Abstract
dc:descriptionThe aim of this thesis is the determination of the mechanical properties of intact rock and their application to the estimation of the strength and deformability of the rock mass. There has been made an attempt to set up the boundaries in rock material behavior and to formulate empirical correlations between rock material parameters. In the frame of the current research a data base has been developed in order to file all laboratory testing results that had been conducted before in Greece by the Laboratory of Engineering Geology in University of Patras as well as the Central Public Works Laboratory. There has been recorded a total number of 5885 entries which correspond to an equal amount of rock specimens subjected to laboratory tests of their physical and/or mechanical properties. The research was focused on triaxial tests of clastic and chemical sedimentary rock specimens as well as marble rock specimens. Clastic and chemical sedimentary rocks are known to be the most widespread rock formations in Western Greece and a lot of major constructions have been made on or within these formations. Block samples were collected from 62 different sites in Greece, in order to be investigated through laboratory testing procedures. After the cutting of the samples laboratory tests were conducted in 519 cylindrical specimens. From these sites 33 were in limestones (271 specimens), 22 in flysch formations (152 sandstone specimens and 24 siltstone specimens) and 7 in marbles (72 specimens). Laboratory core drill and saw machines were used to cut the samples and end faces were ground in order to provide cylindrical specimens in size, shape and ends geometries according to testing requirements. The execution of laboratory tests was in accordance with ISRM suggested methods (1981, 1986) and ASTM standards (D 2664 – 86, D 2938 – 86, D 2845 – 90, D 3967 – 92, D 3148 – 93). More specifically the following laboratory tests were conducted: • 476 tests for porosity n (%), ρd (kN/m3), ρsat (kN/m3), e and Iv. • 249 tests for sound velocities (Vp and Vs). • 336 SHV tests. • 120 point load tests. • 67 uniaxial compressive tests with determination of modulus of deformation E and Poisson ratio, ν (in 58 UCS tests). • 75 brazilian tests. • 62 triaxial tests for rock material constant mi determination. During the evaluation of the results of laboratory testing, 20 thin sections have been made corresponding to different samples, in order to provide all the information as far as the mineralogy and structure of the samples are concerned. Statistical analyses were used in order to evaluate the test results. The strength and deformability of the rock mass corresponding to 32 selected sites were estimated. The Geological Strength Index, GSI and the Disturbance Factor, D were estimated in each site and used as input parameters. The values of mi, also used as input parameters, were those estimated by triaxial testing in the laboratory. Additionally, in order to evaluate the impact of the mechanical parameters of intact rock to the estimation of the strength and deformability of the rock mass, rock mass parameters were estimated using the mi values proposed by relevant bibliographical references. As a result of the comparison between the two methods,the remarkable usefulness of the laboratory testing, as a means of preliminary design as well as the considerable impact of the mechanical parameters of the rock material to the strength and deformability of the rock mass have been pointed out
Degree
thesis:*- Grantor dc:publisher
- University of Patras
- Year dc:date
- 2007
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Papanakli, Styliani
- Παπανακλή, Στυλιανή
Subjects
dc:subject × 20- Βραχομάζα
- Μηχανική αντοχή
- Σταθερά mi
- Αντοχή σε μοναξονική θλίψη
- Αντοχή σε τριαξονική θλίψη
- Αντοχή βροχομάζας
- Παραμορωσιμότητα βραχομάζας
- Βραχομηχανική
- Rock material
- Rock mass
- Mi constant
- Unioxial compressive strength
- Trioxial compressive strength
- Rock mass strength
- Rock mass deformability
- Rock mechanics
- Φυσικές Επιστήμες
- Άλλες Φυσικές Επιστήμες
- Natural Sciences
- Other Natural Sciences
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/27772