Back to search

National Technical University of Athens (NTUA)

Συγκόλληση και επιφανειακή κατεργασία διπλοφασικού ανοξείδωτου χάλυβα 2205 με δέσμη ηλεκτρονίων

Abstract

dc:description

The aim of present investigation is to study the effect of an electron beam surface treatment on 2205 duplex stainless steel joints produced by the same electron beam process. Heat treatment of the joints is necessary, in order to reestablish the ferrite/austenite balance, which is extremely disturbed during the electron beam welding process.For assessing the effectiveness of the electron beam surface treatment, similar weld joints were subjected to conventional furnace heat treatment at 10500C, and used as reference. Metallographic techniques and mechanical testing were used in order to assess the microstructure and corresponding mechanical properties of the as-welded and heat treated specimens. The metallographic results showed that an austenite/ferrite ratio approaching the one produced by a typical furnace post-weld heat treatment can also be achieved by heating locally the weld surface with an electron beam. At the same time the tensile properties show considerable improvement, approaching those obtained by means of a conventional furnace heat treatment, whereas the impact strength is also improved compared to the as welded specimen, but remains clearly lower than the one of the furnace heat treated weld.The pitting and localized corrosion resistance of electron beam welded and surface treated joints were studied by means of electrochemical methods and the use of ferrous chloride solution. The results were compared with as-welded and furnace heat treated specimens tested under similar conditions. These experiments lead to the conclusion that the austenite/ferrite ratio achieved after a postweld surface treatment using the electron beam source, enhanced the corrosion resistance of as-welded specimens. The pitting and localized corrosion properties were substantially improved and the overall behavior approached that of base metal.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2012

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Stergiou, Vasilios
  • Στεργίου, Βασίλειος

Subjects

dc:subject × 10

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/27865

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Stergiou, Vasilios; Στεργίου, Βασίλειος. Συγκόλληση και επιφανειακή κατεργασία διπλοφασικού ανοξείδωτου χάλυβα 2205 με δέσμη ηλεκτρονίων. National Technical University of Athens (NTUA), 2012. http://hdl.handle.net/10442/hedi/27865