National Technical University of Athens (NTUA)
Conservation methods of iron artifacts recovered from the marine environment
Abstract
dc:descriptionThe survivors of iron artifacts in marine archaeological conditions are rarely in a good state. Long term burial of the artifacts in the marine environment often leads to porous, pits friability, salt encrustation, physical damage and severe corrosion that lead to reduce the lifetime of the metal artifacts. Among the variety of chlorine containing compounds, akaganeite is the only one that was evaluated by XRD in the iron coupons and artifacts. Also, chloride ions were assessed by silver nitrate test and EDS. The removal of chloride ions is absolutely essential for the conservation of iron artifacts. Desalination treatment is one of the most laborious and time-consuming of conservation treatments. The results by X-ray diffraction, EDS (Energy dispersive spectrometer) and silver nitrate test proved that cast iron artifacts contain chlorides at higher amount than the wrought objects before the treatment. The efficiency of dechlorination treatment methods is often compared by determining the chloride ion removal and the final appearance of the objects by using further methods of investigation and analyses. We tried in this study to assess desalination treatment methods that can save time and remove a large percentage chloride from the iron artifacts. Many methods of desalination or dechlorination of iron artifacts from the marine environment can be utilized in the conservation laboratories or in marine excavation situ to prevent further damage after being removed from the saline environment. Four methods of dechlorination of underwater iron archaeological objects are used in Demokritos as chemical treatment (NaOH) and/or hydrogen plasma reduction. Recent successes in hydrogen plasma led us to choose this method for dechlorination. From the literature review of desalination, the chemical solution such as sodium hydroxide is the most effective one in the desalination treatment of iron archaeological objects. The conclusions of the experimental tests are as follows: The best way for desalination of the marine iron artifacts is by immersing them firstly in 1-2% sodium hydroxide in 13.5-pH combined with plasma reduction. After the application of these methods, it is less probable for the iron artifacts to be re-corroded. The formation of a stable passivating layer on iron surface artifacts after using 1-2% NaOH combined with plasma reduction was accomplished. At 80 to 300°C, the plasma does not chemically affect the surface or the metallurgical properties. Most of the chloride ions were released during the early stage of desalination. The objective of the dechlorination is to find out if one of these methods is convenient for the conservator to stabilize the metal artifacts from the marine environment. From our work, we can say that modern technological methods, such as plasma reduction, was used to support the conventional methods of conserving archaeological objects as mechanical and chemical treatment. The percentage of removed chlorides increased with time; and temperature of the plasma. The same dependence on time and on temperature was observed for the desalination with sodium hydroxide. The few coupons, as well as the two iron artifacts were completely free from chlorides, while the major quantity of chlorides was removed from the others iron objects.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2011
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Ahmed, Saleh
Subjects
dc:subject × 14Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/27883