Back to search

University of Patras

Βέλτιστος σχεδιασμός πολλαπλασιαστών τάσης για φωτοβολταϊκά πλαίσια συνδεδεμένα στο δίκτυο χαμηλής τάσης

Abstract

dc:description

The current PhD thesis focuses on the field of AC PV Modules using Dual-Steps Inverters and more specifically on DC-DC Converters that are voltage boosters and can act as the first one of the two stages of the inverter. Three goals are accomplished in this work: A)The optimum choice of the topology for the first stage of a dual steps inverter of an AC-PV Module connected to the single-phase low voltage utility grid. B)The optimum choice and design of the Voltage Multiplier. C)The optimum design of the first stage of a dual steps inverter of an AC-PV Module. The analysis of the typical voltage levels at the dual steps topologies turns the research interest to DC-DC Converters with voltage gain (more than 20) higher than what is typical for the classical topologies. Based on that, a theoretical analysis is held on Voltage Multipliers according to which the crucial magnitudes are highlighted and new, simple and accurate formulas are extracted, which describe the operation of the voltage multipliers. Moreover theoretical supported choices about the capacitances in every stage are suggested, an optimum design is determined and for its implementation new accurate easy-to-use formulas are extracted. For an optimal design of the voltage booster, well established comparisons are made between popular types of voltage Multipliers and voltage triggering sources. The intensive research leads to the use of a positive voltage pulsing source that is generated by a modified Boost converter (Mod Boost Converter). Moreover a modified Half-Wave Cockcroft-Walton with Smoothing Capacitor VM is set as the best choice among the studied Voltage Multipliers. Furthermore, a novel iterative optimum design algorithm is introduced, which uses both the theoretical equations of a VM optimum design and a simulation software, so as to make feasible an optimum design of the novel DC-DC Converter. The new converter, named Mod Boost – Mod H-W C-W SC VM, results from the series connection of the modified converters Boost and Half Wave Cockcroft Walton with Smoothing Capacitor VM. Finally, the conclusions and the theoretical analysis of this work are validated by PSPICE simulations and experimental results, extracted by measurements on laboratory prototypes.

Degree

thesis:*
Grantor dc:publisher
University of Patras
Year dc:date
2011

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Kobougias, Ioannis
  • Κομπούγιας, Ιωάννης

Subjects

dc:subject × 17

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/27936

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Kobougias, Ioannis; Κομπούγιας, Ιωάννης. Βέλτιστος σχεδιασμός πολλαπλασιαστών τάσης για φωτοβολταϊκά πλαίσια συνδεδεμένα στο δίκτυο χαμηλής τάσης. University of Patras, 2011. http://hdl.handle.net/10442/hedi/27936