National Technical University of Athens (NTUA)
Σχεδιασμός δέκτη ραδιοσυχνοτήτων για συστήματα υπέρ ευρείας ζώνης λήψης
Abstract
dc:descriptionIt is well known that the most important parts in every wireless communication system are the Low Noise Amplifier (LNA) and the down converter, which are set right after the antenna. These two integrated circuits strongly determine the performance of the whole system and that is why their design is an important field of research. As new demanding protocols of wireless communication came up, such as UWB, the interest on these systems haw raised. Furthermore, the development of integration technologies with smaller transistors in the range of 90 and 65 nm creates mature circumstances for the growth of integrated systems as well as the implementation of new techniques that improves the performance of those circuits. This thesis will present designing methods for both circuits referred above. More specifically, we will focus at the design of a low noise amplifier and a mixer for homodyne receivers. The combination of those two will give us the whole Radio Frequency Front End (RFFE). That’s why the main part of this thesis is constituted from three separated parts. At the beginning the LNA will be presented, the down converter and finally the RFFE. Firstly, the design of a wide band low noise amplifier will be described. The implementation of the circuit is based on the common gate topology that has stable input resistance over frequency and suitable for wide band systems. An inductance is used at the gate of the transistor to minimize noise and increase gain at high frequencies. The circuit is completed by a noise canceling technique for the lower spectrum region. The design of a homodyne mixer is extremelly demanding. There are several problems with the flicker noise and DC offset at the ouput. The first phenomenon becomes extremely tense in technologies of very large scale of integration where the thickness of the oxide is small. To confront this problem, a mixer with a passive mixing pair was designed, that had a very good performance compared to the noise at the exit. The topology that was followed is that of the simple balanced mixer and that because it seems to present a better gain conversion compared to the double balanced one. These two circuits where joined together in a specific way in order to create the RFFE. This process even though seems to easy, demands careful handle, to achieve the right connection in order to reduce the parasitic phenomena between the two subsystems. It is very important to prevent problems such as the leakage from the local oscillator of the system, to the input and to the output. All circuits mentioned at this thesis where designed and materialized with CMOS technologies and in an integration scale lower than 100nm and this fact gives to this thesis a great scientific interest. More specifically, the mixer was implemented as a separated circuit in a technology of 90 nm while the RFFE was designed in 65 nm.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2012
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Simitsakis, Paschalis
- Σιμιτσάκης, Πασχάλης
Subjects
dc:subject × 12- Δέκτης ραδιοσυχνοτήτων
- Ενισχυτής χαμηλού θορύβου
- Μίκτης άμεσης μετατροπής συχνότητας
- Ευρεία ζώνη λήψης
- Radio frequency front end
- Low noise amplifier
- Direct conversion mixer
- Ultra wide band
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Ηλεκτρολόγου Μηχανικού, Ηλεκτρονικού Μηχανικού, Μηχανικού Η/Υ
- Engineering and Technology
- Electrical Engineering, Electronic Engineering, Information Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/28175