Back to search

National and Kapodistrian University of Athens

Παρασκευή και χαρακτηρισμός νανοσύνθετων πολυμερικών υλικών

Abstract

dc:description

In this study a series of poly(vinyl alcohol) – clay nanocomposite materials has been prepared by common solvent method. The PVA used was Mowiol 8-88 supplied by Sigma Aldrich. The clay used was a very abundant mineral, Bentonite which is consisted in majority from Calcium Montmorillonite. The samples were prepared by mixing the Bentonite suspension with the polymer solution in quantities that gave 5, 10 and 20 wt% clay loading content on the produced films and left to dry slowly. The nanocomposites exhibited high levels of clay organization inside the polymer matrix, due to favorable polymer-particle interactions, leading to unique properties. The produced materials were thoroughly characterized by wide angle X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), Atomic Forces Microscopy (AFM), UV- visible transmission spectroscopy, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), mechanical strength, oxygen and water permeability and water sorption study. Emphasis was given to the implementation of neutron diffraction and in particular the contrast matching technique which is not used for the characterization of polymer nanocomposites. AFM images of the nanocomposite’s structure reveal that the clay particles oriented on the surface of the sample. The particles sized 70 nm is clay which orients in plane with the sample’s surface while the lines observed with an approximate width of 20 nm is polymer chains aggregated with way due to space confinement The wide angle XRD curves of the produced PVAB20 sample has a peak appeared at 2FS = 3.2SOH, corresponding to a basal spacing of around 27Å. This increase in basal spacing is due to the polymer intercalation in the clay galleries. From the obtained patterns it is concluded that the clay particles are well organized inside the matrix. These observations are in agreement with the results obtained from microscopy techniques. In the same spectra the characteristic peak of the clay basal spacing (2FS= 7SOH) is also present. This indicates that a small part of the clay is aggregated during film formation. For the samples PVAB05 and PVAB10 the XRD patterns indicate a very good dispersion of the clay in the polymer matrix, since there is no significant peak evident around the expected 2FS angle (3-14SOH). In these cases almost the whole amount of clay was completely exfoliated. In order to investigate the presence of certain orientation in the PVAB20 sample, the film was fragmentated into powder. The diffraction patterns of PVAB20 sample in powder and film form revealed that the 001 peak of the clay is much more pronounced in the case of the film, giving evidence of well orientation of clay particles, parallel to the surface of the nanocomposite film The UV-Vis transmission spectra of the nanocomposites samples show that they retain the poly(vinyl alcohol)’s high optical clarity (above 95% in comparison with the pure PVA film) for the visible region (400-700 nm), due to well nanoscale dispersion of clay particles into the polymer matrix. From the oxygen permeability results it is clear that the permeability decreases as the volume fraction of clay in the composites increases, indicating that the clay particles are well dispersed and oriented in the polymeric matrix. In DSC the existence of new polymer crystalline phase is evident, induced by the presence of the clays. These findings are in agreement with the results obtained from the study of similar polymer-clay systems For 45% RH the Young’s modulus of the samples increased with increasing clay content and it was around 60% more on 5 wt% clay addition and 260% more with 20 wt%. The ultimate tensile strength of the samples was less influenced by the clay content reaching a maximum increase of 60% for the PVAB20 sample. On the measurements for the 70 %RH pre-equilibrated samples the Young’s modulus was a lot more influenced on increasing clay concentration. The diffraction patterns obtained from lamellar and perpendicular sample position revealed that there is a specific orientation of the bentonite platelets parallel to the film surface giving unique properties to the sample.

Degree

thesis:*
Grantor dc:publisher
National and Kapodistrian University of Athens
Year dc:date
2009

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Sapalidis, Andreas
  • Σαπαλίδης, Ανδρέας

Subjects

dc:subject × 15

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/28326

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Sapalidis, Andreas; Σαπαλίδης, Ανδρέας. Παρασκευή και χαρακτηρισμός νανοσύνθετων πολυμερικών υλικών. National and Kapodistrian University of Athens, 2009. http://hdl.handle.net/10442/hedi/28326