Back to search

University of Patras

Ανάπτυξη γραμμικών και διασυνδεδεμένων πολυμερικών ηλεκτρολυτών που φέρουν λειτουργικές ομάδες και εφαρμογή τους σε μοναδιαία κυψελίδα καυσίμου υψηλής θερμοκρασίας

Abstract

dc:description

Fuel cells are a power generation technology, efficient and environmentally friendly. Over the last decades a continuously growing scientific interest is observed for polymer electrolyte membranes for fuel cell applications (PEMFCs). This is due to the fact that this type of fuel cell appears to fulfill the requirements for use in vehicles, portable devices and stationary applications. Operation above 100°C has many advantages such as increased reaction rate, flexibility to use not so pure hydrogen as fuel and system’s simplification resulting in low cost. The heart of a PEM fuel cell consists of two electrodes and the polymer electrolyte. The ideal polymer electrolyte should exhibit good mechanical properties, high thermal, chemical and oxidative stability and high ionic conductivity which depend on its ability to be doped with a strong acid. In this thesis two different experimental approaches are reported, concerning the development of new polymer electrolytes for use in high temperature PEMFCs. The first involves the introduction of side phosphonate or phosphonic acid units onto aromatic polymeric chains bearing pyridine units. Aromatic polyethers are attractive polymeric backbones because of their high thermal/chemical stability and good mechanical properties. The pyridine units provide the ability to be doped with strong acids such us phosphoric acid, leading to the desired ionic conductivity. The immobilization of the acidic side groups targets to the fabrication of materials which will preserve high ionic conductivity values even in lower doping levels. This method could resolve the problem of low conductivities during the fuel cell operation where the water that is formed in some cases leaches out the acid of the membrane. The new polymers were synthesized using the high temperature polycondensation polymerization. The introduction of the pyridine units and side groups was achieved with the use of the proper monomer diols that were also synthesized. The low molecular weight of these materials prevented the formation of membranes and did not allow their further characterization. However, the combination of the basic pyridine groups with the acidic side units resulted in materials with high thermal stability due to acid-base interactions. Then, blends between the synthesized materials with a high molecular weight copolymer bearing pyridine units in the main chain (PPyTMS), were prepared in order to combine the properties of the individual components. Miscible blends with excellent mechanical, thermal properties, high oxidative stability and good ability to dope with acid were obtained. The second experimental approach relates to the synthesis of aromatic polyethers bearing pyridine groups and side double bonds. The obtained polymers were subjected to thermal cross-linking with the use of a bisazide. The cross-linking method is expected to improve the mechanical properties of the impregnated membranes with the aim of using them at high temperature PEMFCs with operation temperatures above 200°C. The higher glass transition temperatures of the crosslinked membranes compared to the virgin polymers, confirmed the successful crosslinking reaction. Furthermore, the selected crosslinker created functional groups which improved the doping ability and the ionic conductivities of the crossliked materials. In addition all the synthesized products showed high oxidative stability. After the synthesis and the characterization of their properties, some of these materials were used for membrane electrode assembly (ΜΕΑ) preparation and studied in a fuel cell with dimensions 5x5 cm² and operation temperatures between 180- 230°C. The I-V diagrams showed high performances which are similar to the PBI which is the main polymer electrolyte in high temperature PEMFCs. Additionally, the crosslinked membrane P[Py(50)-dPy(20)-Prο(30)/SO₂] showed stable performance for about 550 h at 210°C and according to the available literature such a stability has never been reported until today.

Degree

thesis:*
Grantor dc:publisher
University of Patras
Year dc:date
2011

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Papadimitriou, Konstadinia
  • Παπαδημητρίου, Κωνσταντινιά

Subjects

dc:subject × 12

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/28449

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Papadimitriou, Konstadinia; Παπαδημητρίου, Κωνσταντινιά. Ανάπτυξη γραμμικών και διασυνδεδεμένων πολυμερικών ηλεκτρολυτών που φέρουν λειτουργικές ομάδες και εφαρμογή τους σε μοναδιαία κυψελίδα καυσίμου υψηλής θερμοκρασίας. University of Patras, 2011. http://hdl.handle.net/10442/hedi/28449