Abstract
dc:descriptionHigh Velocity Oxy-Fuel (HVOF) thermal spraying constitutes one of the most efficient processes for coating deposition. The combination of high particle velocities (greater than 500 m/s) and low flame temperatures (lower than 3000 oC) lead to adherent coatings with lower porosity and higher wear resistance than other thermal spray processes.Cermet coatings are often used on metals when high surface hardness and wear resistance are demanded. The most commonly applied HVOF cermet coatings are the WC-Co coatings, because of their excellent wear resistance. The carbide phase provides the hardmetal coating with high hardness and wear resistance, whereas the metal binder phase (Co, Ni, Co-Cr, etc.) provides the coating with toughness. Nanostructured coatings are expected to exhibit improved surface properties in comparison to the conventional coatings, owing to their reduced grain size. Thus, WC-Co nano coatings present higher hardness and fracture toughness than the respective conventional coatings.In many applications of cermet coatings, corrosive environments are involved. The HVOF cermet coatings exhibit complicated corrosion behavior due to their complex microstructure that involves various corrosion cell inducers, such as interlayer boundaries, phase boundaries, splat interfaces, pores, oxide inclusions and non-uniform carbide dissolution into the metal matrix. Very few works have investigated the corrosion performance of cermet coatings made of nanostructured powders.In the present effort conventional and nanocrystalline WC-12%Co and WC-10%Co-4%Cr coatings on Al 7075 T6 substrate were produced by HVOF thermal spray technique. The developed coatings were characterized as far as their macrostructure and the fundamental coating properties are concerned. The corrosion and the sliding wear behavior was also investigated. The produced coatings (conventional and nanocrystalline) are of high quality, low porosity, solid microstructure and high microhardness. The nanocrystalline coatings show more solid and uniform microstructure compared to the corresponding conventional ones, with the carbide reinforcing particles being more uniformly distributed with in the metallic matrix
Degree
thesis:*- Grantor dc:publisher
- University of Ioannina
- Year dc:date
- 2011
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Σιούλας, Δημήτριος
- Sioulas, Dimitrios
Subjects
dc:subject × 17Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/28466