University of Patras
Ανάπτυξη αριθμητικού προτύπου για την προσομοίωση της σφυρηλάτησης με βολή σωματιδίων
Abstract
dc:descriptionShot peening is a surface treatment process that is performed to increase the strength of metallic materials and is applied to the last stage of the production line (post manufacturing process). The increase in strength is achieved by the developed compressive residual stresses near the surface and the subsurface of the treated material after the impact of small diameter particles with high speeds. The developed compressive residual stresses increases the fatigue strength, the mechanical performance of the component under stress corrosion cracking (SCC), under higher stresses and allows lighter structure design. This PhD thesis presents a comprehensive numerical simulation of the Shot peening process and includes a comprehensive study of the mechanical behaviour of treated materials under high strain rates of deformation. Specifically, the methodology developed includes the development of a comprehensive numerical model to simulate Shot peening treatment and calculate the results on the treated material. The steps followed for the development of the numerical model are: a) the characterization of the Aluminium alloy 7449-T7651 at high strain rates using a Split Hopkinson Bar apparatus designed and built at the Laboratory of Technology and Strength of Materials, b) the development of auxiliary partial numerical models, c) the development of a kinematic simulation model for the analysis of the flow particles, d) the development and the application of two criteria for the successful calculation of the minimum number of particles that required for the simulation, and the impact positions e) the development of a numerical model describing the full plate geometry for the impact of the minimum number of particles required and f) the experimental verification of the numerical model. The process outcomes and results on the treated material were calculated by the numerical model developed. The numerical results that were calculated for the threaded material were confirmed by comparison with experimental results. Treatment results include the residual stresses, the plastic deformation, hardness, surface roughness, and hence the stress concentration factor. A parametric study on the effect of the diameter, speed and angle of impact to the development of residual stresses was performed. The numerical model was also verified for a number of other metallic materials.
Degree
thesis:*- Grantor dc:publisher
- University of Patras
- Year dc:date
- 2012
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Mylonas, Georgios
- Μυλωνάς, Γεώργιος
Subjects
dc:subject × 16- Βολή με σωματίδια
- Σφυρηλάτηση με βολή σωματιδίων
- Προσομοίωση κατεργασίας
- Υψηλές ταχύτητες παραμόρφωσης
- Πειραματική διάταξη Hopkinson
- Κράμα αλουμινίου 7449 Τ7651
- Αριθμητικό μοντέλο
- Shot peening process simulation
- High strain rate deformation
- Aluminium alloy 7449 T7651
- Numerical modelling
- Split Hopkinson pressure bar
- Επιστήμες Μηχανικού και Τεχνολογία
- Μηχανική Υλικών
- Engineering and Technology
- Materials Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/28492