Back to search

National Technical University of Athens (NTUA)

Προαναμεμειγμένη καύση κινητήρων ντήζελ

Abstract

dc:description

The objective of the doctoral dissertation is the study of Homogeneous Charge Compression Ignition combustion through simulation. Τhe dissertation initially involved the creation of a single-zone model followed by a new multi-zone model, both simulating the closed part of the engine cycle (compression, combustion and expansion). The single-zone model was used for the parametric investigation and the description of HCCI combustion. The multi-zone model includes sub-models for the description of combustion (Chemical Kinetics using CHEMKIN) and heat and mass transfer within the combustion chamber. Thus it provides an estimation of the temperature field and the mass flow from/to the crevices. These improvements allow a better understanding of the physicochemical processes involved in HCCI combustion and predictions concerning the ignition angle, the combustion rate and the emissions are more accurate. The multi-zone model was used for the parametric investigation of HCCI combustion, providing a useful description of physicochemical processes as well. The simulation produced the following results: 1. Temperature and compression ratio significantly affect the ignition angle, whilst initial pressure and fuel quantity have a lower effect, though they do determine the engine load. 2. Engine speed affects ignition angle as it determines the available time for the reactions which lead to ignition. 3. It is essential to model the chemical reactions which take place at low and high temperatures, in order to predict ignition angle and combustion rate. 4. The multi-zone model provides more accurate results than the single–zone model as far as physicochemical processes are concerned, at the expense of increased computational time. 5. Multi-zone model simulation revealed that heat and mass transfer mechanisms determine the temperature field within the combustion chamber and directly affect the formation of unburned hydrocarbons and carbon monoxide. It was concluded that the interaction between the crevices and the relatively cold regions located at the vicinity of the combustion chamber walls, is mainly responsible for the creation of CO and HC emissions. 6. The model was validated –as regards performance and emissions of HCCI engines- against experimental results provided by the Lund Institute of Technology. The validation revealed that the model describes qualitatively the combustion mechanism and the pollutant emissions formation.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2007

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Komninos, Neofytos
  • Κομνηνός, Νεόφυτος

Subjects

dc:subject × 25

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/28512

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Komninos, Neofytos; Κομνηνός, Νεόφυτος. Προαναμεμειγμένη καύση κινητήρων ντήζελ. National Technical University of Athens (NTUA), 2007. http://hdl.handle.net/10442/hedi/28512