Back to search

University of Patras

Υπολογιστική και πειραματική ανάλυση διφασικής ροής αέρα - νερού σε φυγοκεντρικούς διαχωριστές

Abstract

dc:description

The growth experienced in recent decades in the extraction of hydrocarbons, led to the adoption of increasingly modern technical products towards the phase separation near the source. The centrifugal separator is the most successful and widespread application. In this range of products, belongs the novel centrifugal separator presented in the present study. The analysis tries to balance between a "strictly scientific" analysis of the turbulent two-phase flow field in the separator and a more "practical" analysis of the performance of this device. The first is necessary because of the originality that has the particular scientific field and the lack of previous studies covering the issue; while the latter is essential because of the "practicality" we expect the final result to have. The problem that the present work is trying to solve, and the literature review that determines the direction to be followed by the research team, are presented in the 1st chapter. To tackle this problem, we follow a standard procedure of an industrial product development in four stages. In the first stage, the concept of function and the theory on which it is based are discussed. In the second stage, an initial investigation of the separator running a CFD simulation is performed. In the third step, an experimental - parametric analysis of the separator’s performance is being held. Finally, the fourth step is a confirmation - verification of CFD simulation. The 2nd chapter, is a theoretical analysis on the development of the governing equations of fluid flow. The equations of motion are developed and the transformation after the turbulence development is explained. At this point it is understood that it is not possible to solve them by analytical methods but with numerical. This is the beginning of the entry of numerical methods in fluid mechanics. The 3rd chapter, outlines the theoretical background upon which the analysis of two-phase flows and of turbulent flows is based. The theoretical analysis is completed in the 4th chapter by deepening in the numerical solution of equations of the second chapter. We begin with a brief presentation of the methods developed in recent decades, focusing on the method used in this work. Several simulation models focusing on the two-phase flow are presented here. Because this topic includes extensive mathematics, several sections were carried in Annex 1 to allow for consistency to the body of work, and maintain a balance between theoretical analysis and practice - research approach mentioned earlier. The presentation of pure research project starts in the 5th chapter, following the logical and chronological sequence that was analyzed before, with four stages in the “product development”. In this chapter, we discussed the concept of function and the theory on which it is based, and presented drawings of the design procedure in AUTOCAD. Apart from this however, it was decided to go a step further by building the grid of the flow field inside separator geometry. The reason is purely technical and is the similarity of the following two tasks: the design in AUTOCAD and geometry and mesh generation in GAMBIT. So the grid was generated in order not to revert to the use of GAMBIT in the next chapter. In the 6th chapter, we investigate the operation of the separator, by conducting an initial CFD simulation. An investigation of air-water separation process has been conducted using Υπολογιστική και Πειραματική Ανάλυση Διφασικής Ροής Αέρα – Νερού σε Φυγοκεντρικούς Διαχωριστές xi numerical simulation. Separator performance has been analyzed in terms of separation efficiency and pressure drop along the water flow path. The results of the analysis show that the performance increases with the inflow speed of the mixture which is scientifically correct - acceptable. Having achieved a converged solution and having produced images of the flow inside the separator we give a qualitative assessment of the flow field. Because the extracted work here is mostly pictures of the FLUENT describing the flow, these are listed in Annex 2 to facilitate the flow of the thesis. In the 7th chapter, the experimental - parametric analysis of the separator’s performance is conducted. New experimental data are reported, on the onsets of gas (air) and liquid (water) entrainment, mass flow rate and separation performance for the two-phase flow through the novel compact phase separator under various conditions. These data series cover the ranges of hmmhmwater/4/1303≤≤− and %90%4≤≤airvf. Influences of the independent parameters airm−0 and waterm−0 combined as air volume fraction vfair on the performance n, were considered. In this chapter, special emphasis is placed on describing the experimental setup, which did not exist, but was designed and built from scratch for this work. Designs from the design stage of the installation in AUTOCAD and its details are presented in detail in Annex 3 along with typical images of the operation. The first outcome of the experiment is the analysis of device’s performance as presented in chapter 7. The second outcome, -equally important- is the certification of modeling technique applied in chapter 6. This process takes place in the 8th chapter. The outcome, is to standardize the configuration of the computational process in such a way, that in the next development loop of the product, we have more and more reliable results than in the first stage. Finally, in chapter 9 (deposited soon after the experience gained), a series of possible improvements in the separator are presented. We leave it to the point that the academic analysis of the flow field was completed successfully and focus on more the practical aspect of improving the device’s performance.

Degree

thesis:*
Grantor dc:publisher
University of Patras
Year dc:date
2012

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Kefalas, Panagiotis
  • Κεφάλας, Παναγιώτης

Subjects

dc:subject × 12

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/28634

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Kefalas, Panagiotis; Κεφάλας, Παναγιώτης. Υπολογιστική και πειραματική ανάλυση διφασικής ροής αέρα - νερού σε φυγοκεντρικούς διαχωριστές. University of Patras, 2012. http://hdl.handle.net/10442/hedi/28634