Back to search

Aristotle University Of Thessaloniki (AUTH)

Χρήση στερεών ιοντικών αγωγών στη μελέτη αναμόρφωση ή / και διμερισμού του μεθανίου παρουσία υδρατμών

Abstract

dc:description

In the present thesis double-chamber solid state proton and oxygen ion conducting cells were used for the simultaneous production of C2 hydrocarbons and hydrogen or electricity from methane in the presence of steam. Various catalytic systems were tested for the simultaneous production of C2’s and hydrogen or C2’s and electricity in the proton conducting cell. The most important were a mixture of Au and Ce-Na2WO4/SiO2 (Au-CNWS), the perovskite La0,6Sr0,4Co0,8Fe0,2O3-a (LSCF) and Ag. The catalytic experiments with Ag showed good catalytic activity for the production of ethane, ethylene and hydrogen with C2 selectivities above 50 % in many cases. In the proton pumping experiments the production rates of the useful products increased and the separation of hydrogen was again high (80-90 %). In the cogeneration experiments (fuel cell) the greatest power production (of the systems tested) was achieved at 3.89 mW with a concurrent C2 yield enhancement of 25 %. In the present thesis the possibility of simultaneous production of ethane, ethylene and hydrogen in an oxygen ion conducting cell, Ag/YSZ/Pt is also presented. In this setup the cathode (Pt) is fed with steam instead of oxygen or air. On the application of a constant current steam is electrolyzed (H2O + 2 e- H2 + O2-) and the oxygen ions are transported through the electrolyte lattice to the anode (Ag) where they react with methane to form C2’s (CH4 + O2- C2H6 + C2H4 + H2O + 2e-). Hydrogen is thus produced in a chamber separate from the C2’s making separation much easier. It was found that controlling the electrochemical supply of oxygen could tune the system to either higher hydrogen or higher C2 yields. The maximum yield in ethane and ethylene combined was 5.65 % with a hydrogen production rate of 1.4∙10-6 mol/s (70 % of the steam feed) at 840 oC, but at least 50 % of the oxygen did not react on the Ag electrode and desorbed to the gas phase. In order to take advantage of the desorbing oxygen, a quantity of catalyst for the oxidative coupling of methane (OCM) was added to the Ag/YSZ/Pt cell (on the Ag electrode) leading to a new type of hybrid solid electrolyte/fixed bed cell. In this way the C2 yield was enhanced from 4.8 to 8.1 % when using Ce-Na2WO4/SiO2 at 800 oC and from 0.6 to 7.4 % when using SrZr0.95Y0.05O3-a at 720 oC compared to plain Ag (under the same conditions). Finally, the stability of the hybrid cells was verified for 12 to 16 hour runs, under constant current. Future studies should focus on a very few materials (one or two membrane types and catalysts) with the construction of a reactor similar to a commercial one, and on long term stability tests. A further investigation of the MnxCe1-x-Na2WO4/SiO2 catalyst family would be a good starting point.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2012

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Kyriakou, Vasileios
  • Κυριάκου, Βασίλειος

Subjects

dc:subject × 12

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/28766

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Kyriakou, Vasileios; Κυριάκου, Βασίλειος. Χρήση στερεών ιοντικών αγωγών στη μελέτη αναμόρφωση ή / και διμερισμού του μεθανίου παρουσία υδρατμών. Aristotle University Of Thessaloniki (AUTH), 2012. http://hdl.handle.net/10442/hedi/28766