University of Ioannina
Ανάπτυξη, βελτιστοποίηση και εφαρμογή της υγρής υγρής μικροεκχύλισης διασποράς (DLLME και DLLME-SFO) για τον προσδιορισμό επιλεγμένων ομάδων χημικών προϊόντων προσωπικής φροντίδας, UV filters, PCMS και PAES σε συνδυασμό με χημειομετρικές μεθόδους
Abstract
dc:descriptionTraditional methods for sample preparation including liquid-liquid extraction, soxhlet extraction, chromatography, distillation, and absorption, usually suffer from the disadvantages of time-consuming, large amounts of toxic organic solvent to be used and difficulty in automation to some extent. For these reasons two new analytical methods were developed in our laboratory which are less time-consuming, more effective and require smaller amounts of organic solvents. Dispersive Liquid-Liquid Microextraction (DLLME) and Dispersive liquid–liquid microextraction method based on solidification of floating organic drop (DLLME – SFO).Both analytical methods, DLLME and DLLME-SFO, were developed for the determination of UV Filters, Polycyclic musks (PCMs) and phthalate esters (PAEs) in environmental water and soil samples and DLLME-SFO was applied in the Wastewater Treatment Plant Of Ioannina in order to retrace and determine the concentration of the analytes. DLLME method was coupled with GC-MS and HPLC instrumentation for the analysis of UV Filters, Polycyclic musks (PCMs) and phthalate esters (PAEs), on the other hand DLLME-SFO was combined with GC-MS. A lot of parameters influence the extraction efficiency such as the volume of extraction and disperser solvent, salt effect and extraction time, of both methods. All the parameters were optimized with the aid of response surface methodology and experimental design. Firstly, a Plackett - Burman screening design was used to choose the significant variables for the optimization. Secondly, the significant factors were optimized by using a central composite design (CCD) and the quadratic model between the dependent and the independent variables was built. Finally, desirability function was used for simultaneous optimization of all affecting parameters in order to achieve the highest extraction efficiency. Next step in our research was the contrast between the DLLME and DLLME-SFO analytical methods, with the aid of F-test and t-test. The results saw no significant difference. The main advantages of DLLME-SFO in comparison to DLLME are:1.The use of lower toxicity extracting solvents 2.The floated extractant is solidified and easily collected from the top of the solution for analysis For these reasons, DLLME-SFO method was selected for the development and the determination of all the compounds in environmental samples and then to applied in the Wastewater Treatment Plant Of Ioannina in order to retrace and determine the concentration of the analytes.
Degree
thesis:*- Grantor dc:publisher
- University of Ioannina
- Year dc:date
- 2013
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Panagiotou, Katerina
- Παναγιώτου, Αικατερίνη
Subjects
dc:subject × 19- Υγρή-υγρή μικροεκχύλιση διασποράς
- Χημειομετρικές μέθοδοι
- Φίλτρα UV
- Πολυκυκλικές αρωματικές ενώσεις
- Φθαλικοί εστέρες
- Βιολογικός καθαρισμός
- Επιφανειακά ύδατα
- Dispersive liquid-liquid microextraction
- DLLME-SFO
- UV filters
- Polycyclic musk
- Phthalate esters
- Experimental designs
- Plackett burman
- Desirability function
- Φυσικές Επιστήμες
- Χημεία
- Natural Sciences
- Chemical Sciences
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/29013