Aristotle University Of Thessaloniki (AUTH)
Απομάκρυνση τοξικών ουσιών (Cu, Cr, As) από ανακυκλώμενο ξύλο εμποτισμένο με CCA και ανάπτυξη νέων σύνθετων οικολογικών υλικών
Abstract
dc:descriptionConcerns about the safety and the environmental impacts of impregnated woodwith CCA, particularly after its uses, require research for its environmentalmanagement. The main problem with CCA-treated wood waste is that they stillcontaining the toxic preservatives with which they were impregnated. The aim of thisstudy was:1) to investigate the removal of copper (Cu), chromium (Cr) and arsenic (As)from weathered out-of-service CCA-treated wood by chemical extraction (leaching)with weak organic acids (oxalic, citric, formic and acetic acid and distilled water), andto assess the effect of a) the type of disposed wood (structures in parks, children’splay structures, benches, shelters, timber from conservatories, picket fences -underground and above the ground, and stored timber) and b) the type of leachingagent and leaching temperature and time on the removal of the above metals and onthe chemical composition (% of total extractives, of lignin, of holocellulose and ofash) of the treated (remediated) wood.2) to develop biodegradable wood plastic composites (WPC) using wood flourfrom extracted (remediated) and unextracted wood waste (Pinus nigra) and twothermoplastic matrices such as thermoplastic starch (TPS) and polyethylene (PE). Themechanical, thermal, hydroscopic and biodedegradation properties of the compositeswere evaluated and the effect of the manufacture parameter such as type of polymericmatrix, type and of % wt of wood content in the composites on the above propertieswas investigated. The results of the metal leaching study showed that the removal of copper,chromium and arsenic from the various wood wastes was possible in high percentageseven at room temperature (23 ± 2oC). In all cases the percentage removal of themetals increased by increasing the duration and temperature of extraction. Increasingthe temperature to 50oC and 75oC for six (6) and nine (9) hours extraction with oxalicand citric acid removed more than 90% of the metals in wood.Wood extractions with oxalic and citric acid showed to cause a significantchange on the chemical composition of wood such as % of extractives, lignin,holocellulose and ash. At room temperature the % of total extractives depending onthe type of wood waste, the extraction agent and time, ranged between 1,03% and4,36%. Increasing the temperature to 50oC and 75oC and duration of extraction fromthree (3) to six (6) and nine (9) hours increased the percentage of total extracts fromwood. Depending on the extracting agent, the temperature and time of extraction the% of extractives ranged between 2,0% and 13,54%. Extraction with oxalic acid gavethe highest rates of extracts followed by citric and formic acid. The smallerpercentage of extracts was given by acetic acid.The % of holocellulose was reduced, due to hydrolysis, mainly ofhemicelluloses, and the % of lignin and ash were increased.The development of wood plastic composites with thermoplastic starch (TPS) orpolyethylene (PE) matrices and the as above treated (remediated) wood types showedthat the addition of wood particles and their percentage ratio in the composites as wellas the remediation treatment of the particles had a profound effect on the properties ofthe composites.Incorporation of wood flour in the composites made with TPS increased MORand MOE and reduced elongation at break, decreased water absorption and thicknessswelling, increased thermal stability but decreased biodegrability of the composites.The above changes in the properties of the composites increased with increasingpercentage of wood in the composites from 30% to 40% and 50%. Wood extractedwith oxalic and citric acid, when compared with unextracted wood, gave lowerbreaking strength, lower modulus of elasticity, high resistance to water absorption andswelling, greater resistance to the influence of temperature, and a lower rate ofbiodegradation.Incorporation of wood flour in the composites made with PE also increasedMOR and MOE and reduced elongation at break, increased biodegrability but increased water absorption, thickness swelling but reduced thermal stability of thecomposites. The above changes in the properties of the composites increased withincreasing percentage of wood in the composites from 30% to 40% and 50%. Woodwas extracted with oxalic acid and citric acid, in comparison with unextracted woodgave lower breaking strength, lower modulus of elasticity, decreased elongation atbreak, lower resistance to water absorption and swelling, greater resistance to theeffect of temperature and lower percentage of biodegradation.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2013
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Kalaitzi, Soultana
- Καλαϊτζή, Σουλτάνα
Subjects
dc:subject × 21- Εμποτισμένη ξυλεία
- Απομάκρυνση μετάλλων
- Χημική εκχύλιση
- Αραιά οργανικά οξέα
- Βιοαποικοδομήσιμα πλαστικά
- Σύνθετα υλικά
- Πλαστικοποιημένο άμυλο
- Πολυαιθυλένιο
- Λιγνιτοκυτταρινικές ύλες
- CCA-treated wood waste
- Remediation
- Chemical extraction
- Organic acids
- Biodegradable composites
- Starch
- Polyethylene
- Wood flour
- Γεωπονικές Επιστήμες και Κτηνιατρική
- Γεωπονία, Δασολογία και Αλιεία
- Agricultural and Veterinary Sciences
- Agriculture, Forestry and Fisheries
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/29069