Abstract
dc:descriptionThe present thesis consists of two parts: the first one refers to the study of the affection of the environmental conditions to the dielectric properties of selected solid, liquid and polymer materials, while the second part refers to the study of the electrodeposition of CdSe films and how they are affected due to the change of various parameters. The chosen solid dielectric materials (Τ1Ο₂, ΑΙ₂Ο₃ and Li₂CΟ₃) are used in the form of cement, molding blends of different composition, which, in turn, were shaped in solid samples and submitted in thermal processing in order to form ceramic materials. The study exploits the dependence of the dielectric values on the composition and the structure morphology of each sample, the degree of the thermal processing as well as the environmental conditions (temperature, moisture). The construction of high k - low loss materials is proposed for micro-electronic and telecom applications. The insulating oil, which has an extended use in electrical equipment and most important, the power transformers, has been chosen as liquid dielectric material. The dielectric behavior of the dielectric liquid (mineral oil) enriched with low concentration nano-materials is studied. Scope of the study is the monitoring of the dielectric behavior of the oil and the reversal of possible negative aging phenomena due to byproducts. The biaxially oriented polypropelene (BOPP) has been chosen as dielectric polymer. The induced changes on complex permittivity after applying UV/condensation cycles were investigated. Scope of the second part of this thesis is the development of CdSe thin films on nickel substrate and the study of the electrical and structure properties of the samples. The factors that have been differentiated are: temperature of the solution, the surface of the substrate (oxidation of nickel), the presence of nitrogen during the electroplating and the thermal processing of the produced samples during the presence of nitrogen. Each processing has been studied in order to determine affects at the crystallization of the produced CdSe films, its rectifying properties and its surface morphology. The last part of the work is to propose the most applicable processing method where the most appropriate results occurred in order the produced semiconductor to be used in photovoltaic applications.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2013
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Athanassopoulou, Maria
- Αθανασοπούλου, Μαρία
Subjects
dc:subject × 19- Οξείδιο τιτανίου
- Διηλεκτρικά
- Μετασχημαστισμοί φάσης
- Πολυμερή
- Νανορευστά
- Μέτρηση διηλεκτρικής σταθεράς
- Βουρτσίτης CdSe
- Λεπτά υμένια
- Titanium oxide
- Dielectrism
- Phase transformations
- Polymers
- Nanofluids
- Wurtzite
- Thin films
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Ηλεκτρολόγου Μηχανικού, Ηλεκτρονικού Μηχανικού, Μηχανικού Η/Υ
- Engineering and Technology
- Electrical Engineering, Electronic Engineering, Information Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/29149