Back to search

National Technical University of Athens (NTUA)

Επίδραση της προσθήκης ιπτάμενης τέφρας λιγνίτη και λιθάνθρακα στις ιδιότητες σύνθετων υλικών μεταλλικής μήτρας κραμάτων αλουμινίου

Abstract

dc:description

In the this PhD study, Hellenic, Class C fly ashes were utilized for the synthesis of Al- and Al-alloy-matrix composites by means of Powder Metallurgy, Pressure Infiltration, and Stir Casting techniques. In the case of Powder Metallurgy (P/M), aluminum–fly ash and aluminum/silicon alloy (Al-12Si)-fly ash mixtures, containing 5, 10, 15, and 20 wt.% fly ash were prepared and compacted. The green products were sintered for 2 and 6 hours in inert atmosphere. The composites are tested for: a) their microstructure, b) chemical composition, c) mineralogy, d) tribological performance, e) hardness, and f) corrosion behavior. The microscopic studies of green and sintered compacts clearly indicated the effectiveness of sintering process. Moreover, it was shown that the addition of both types of ash enhanced the tribo-performance of Al, with the optimum metal powder replacement determined to the point of 15% wt., in the case of high-Si and 10% wt., in the case of high-Ca ash particles. Corrosion resistance of P/M Al- and Al-alloy composites is declined compared to the matrix materials. In the case of pressure infiltration, KFA and MFA were separated into their particle fractions by means of manual screening. Narrow-sized particle fractions were selected so as to better facilitate homogeneity into the composites. Before they are incorporated into composites, the various fractions are characterized in terms of their chemical, mineralogical composition and thermal properties. Moreover, so as to investigate the effect of using ground ash particles on the composite properties, one specific particle fraction (25-40μm) is ground and the final specimens are comparatively examined on the basis of the effect of “as received” and ground ash particles. The composite specimens underwent the same series of characterization tests with the P/M products, with the exception of corrosion behavior. It was concluded that using fine, high-Ca ash particles can improve the properties of composites, and that using ash particles in a ground form can better facilitate the production process of MMCs. In the case of stir casting, it was verified that conducting stir mixing of fine, gradually pre-heated calcareous FA particles at a higher molten alloy-temperature (Tmelt > 900ºC, while previous attempts referred to ~700ºC) can eventually result in the incorporation of high-Ca FA particles into the melt and in the subsequent successful synthesis of lightweight Al alloy composites containing at least 10 wt. % FA, with enhanced tribo properties.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2012

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Itskos, Grigorios
  • Ίτσκος, Γρηγόριος

Subjects

dc:subject × 24

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/29183

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Itskos, Grigorios; Ίτσκος, Γρηγόριος. Επίδραση της προσθήκης ιπτάμενης τέφρας λιγνίτη και λιθάνθρακα στις ιδιότητες σύνθετων υλικών μεταλλικής μήτρας κραμάτων αλουμινίου. National Technical University of Athens (NTUA), 2012. http://hdl.handle.net/10442/hedi/29183