National Technical University of Athens (NTUA)
Επίδραση των συνθηκών παραγωγής στις ιδιότητες πυρίμαχων υλικών
Abstract
dc:descriptionAiming to the design of refractory products structural, mechanical, and thermal properties were investigated. The selected raw materials were Greek bauxite and chamotte, which is a recycled refractory aluminosilicate material. Three different materials were investigated after mixing both raw materials with an aluminate cement and also bauxite with a phenol formaldehyde resin. Different production conditions and raw materials characteristics were selected (bonding material’s content, raw material’s particle size, molding pressure and firing temperature). After data analysis, mathematical models were obtained for the prediction of all materials’ properties. Regarding the structural properties, true density was found to be dependent only by the raw material. The refractories produced using bauxite exhibited higher density due to faster sintering that occurs during firing, due to their higher content in alumina (Al2O3). In addition, it has been observed that an increase in all production conditions has led to an increase in apparent density and thus a reduction in porosity, with the exception of chamotte’s grain size that did not seem to affect specimens’ density. For the study of mechanical properties an appropriate mathematical model was fitted to the experimental data, containing parameters with physical meaning: maximum stress, maximum strain, modulus of elasticity and viscoelastic parameter. Simple mathematical models were developed to correlate those parameters to the production conditions and raw materials’ characteristics. After data processing it was noticed that when increasing molding pressure, maximum stress and maximum strain increased, while the viscoelastic parameter did not seem to be independent of this change. Firing temperature significantly affects mechanical properties and it caused their increment. Higher bonding agent concentration led to higher compressive strength, while, increased raw materials’ grain size leads to samples with lower elasticity parameter. The examination of thermal properties was performed using thermogravimetry and differential scanning calorimetry, where a small mass loss was recorded. In addition, loss on ignition of the raw materials, as well as water absorption capacity of the different refractories was evaluated. Finally, after thermal shock tests chamotte refractories showed increased resistance in quenching, while bauxitic, cement-bonded refractories presented imperfections after a short number of intervals.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2012
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Κατσαβού, Ιωάννα
- Katsavou, Ioanna
Subjects
dc:subject × 14- Κεραμικά υλικά
- Αλουμινούχα πυρίμαχα
- Θερμοφυσικές ιδιότητες
- Μαθηματική προτυποποίηση
- Συνθήκες της διεργασίας και χαρακτηριστικά των πρώτων υλών
- Ceramics
- Alumina refractories
- Thermophysical properties
- Mathematical modeling
- Process conditions and raw materials characteristics
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Χημικού Μηχανικού
- Engineering and Technology
- Chemical Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/29184