Back to search

University of Patras

Μοντελοποίηση έλεγχος και διάγνωση σφαλμάτων κινητήριου συστήματος αποτελούμενου από δύο ασύγχρονες μηχανές με κοινό φορτίο κλίβανο τσιμεντοβιομηχανίας

Abstract

dc:description

This thesis deals with the modeling, the control and the diagnosis of mechanical faults in a dual ac drive with common mechanical load. Chapter 1 constitutes an introduction of the reader to the electrical drive systems. Initially, a short historical retrospection of these systems is realized, while afterwards the thematic units that constitute the contributions of the present thesis, which can be summarized as the control of a dual cement kiln drive and the diagnosis of mechanical gear faults using the ac motor as a sensor, are presented. In chapter 2 the specifications and the operational characteristics of the kiln drive system are presented based on the industrial requirements and the existing references. Particularly the torque – speed characteristic load curve of the kiln, the advantages of upgrading the dc drives with ac ones, the parameters which determine the decision of installing a single or a dual transmission system and the need of uninterrupted operation of the kiln drive are underlined. In addition the step by step development of a simulating model of the under study system in the Matlab/Simulink environment is presented in chapter 3. Particularly the equations of motion for the kiln and the transmission system, the dynamic model equations of the asynchronous motor, the power electronics converters and the control strategy based on the Direct Torque Control have been incorporated in the Matlab/Simulink environment through which a theoretical investigation is realized. Moreover, the design and the development of an under scale laboratory simulating system of the kiln drive has been realized and the characteristics of the design specifications of the laboratory system are presented in chapter 4. Using the theoretical model developed in the Matlab/Simulink environment and the laboratory simulating system, a comparison of the existing control methods used for the electric drive systems (speed control and torque control) is being presented (chapter 5), focusing at specific malfunctions which can be caused by the application of these controls at a dual cement kiln drive. Taking into account these malfunctions, a novel hybrid control method is being presented whose operation is based on the application of a parallel-hybrid speed and torque control, simultaneously at both electric motors. In this way an equal load distribution can be achieved, obviating at the same the appearance of mechanical malfunctions. In chapter 6, the fault diagnosis of electromechanical drives is referenced, focusing on the identification of mechanical faults appeared in the pinion/girth gear coupling using the ac motor as a sensor. The proposed diagnostic method is based on the detection of multiples of the defective frequency at both phase current and electromagnetic torque frequency spectrum. The effectiveness of the proposed method is verified using experimental results from the laboratory simulating system, operating as a single drive. Finally, chapter 7, 8 and 9 include an estimation of the thesis contribution, a summary and the reference part respectively.

Degree

thesis:*
Grantor dc:publisher
University of Patras
Year dc:date
2012

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Bogiatzidis, Ioannis
  • Μπογιατζίδης, Ιωάννης

Subjects

dc:subject × 19

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/29208

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Bogiatzidis, Ioannis; Μπογιατζίδης, Ιωάννης. Μοντελοποίηση έλεγχος και διάγνωση σφαλμάτων κινητήριου συστήματος αποτελούμενου από δύο ασύγχρονες μηχανές με κοινό φορτίο κλίβανο τσιμεντοβιομηχανίας. University of Patras, 2012. http://hdl.handle.net/10442/hedi/29208