Technical University of Crete (TUC)
Υπερβολικό μοντέλο αστοχίας υλικών με συνοχή και εσωτερική τριβή
Abstract
dc:descriptionIn this PhD Dissertation a hyperbolic failure criterion for cohesive, frictional and dilatant materials (rocks, soils, concrete etc.) is proposed. The failure/yield surface is calibrated by virtue of three free variables which have a clear physical meaning. The criterion predicts well both the tensile and compression regimes of a geomaterial and it takes under consideration the influence of the intermediate principal stress. The meridians of the failure surface are hyperbolas while the trace on the deviatoric plane is described by an elliptic function. The shape on the deviatoric plane evolves from triangular at the tensile regime to circular at high confinement. Thus, the failure surface exhibits brittle behavior at low confinement and ductile at high compression stresses. The calibration results show that the proposed criterion can predict very well the experimental results and it is equivalent or even better than the most widespread used criteria.Based on this hyperbolic criterion, an elastoplastic constitutive model was also elaborated. The calibration of the elastoplastic model requires five additional parameters which are calculated from the uniaxial compression test. For the elastic response of the model, the linear isotropic Hooke law with constant parameters has been considered. For the work hardening behavior, a hardening law is proposed that results in anisotropic hardening of the yield surface. The history of the irreversible plastic deformation, that also drives the hardening law, is the plastic octahedral shear strain. The failure stress is attained when a critical amount of plastic octahedral shear strain has been accumulated into the material. This critical plastic shear strain is considered as a material property. Moreover, a dilatancy rule is proposed that takes under consideration the position of the stress point or in other words the stress inclination. Finally, the damage effect is not considered in this work.Back-analysis results show that the proposed elastoplastic model predicts relatively well the material response a low confinement stresses. The discrepancies observed are mainly due to the assumed constant elastic parameters. The considerations of the hardening law as well as the damage effect also contribute to the observed discrepancies. It was realized that a good elastoplastic model should be based on a robust elasticity model.Finally, in the context of this PhD Dissertation, a relational database for Rock Mechanics tests has been constructed. All the parameters of the elastoplastic model were calibrated on data stored in this database.
Degree
thesis:*- Grantor dc:publisher
- Technical University of Crete (TUC)
- Year dc:date
- 2013
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Liolios, Pantelis
- Λιόλιος, Παντελής
Subjects
dc:subject × 18- Αστοχία υλικών
- Κριτήριο αστοχίας
- Ελαστοπλαστικό μοντέλο
- Επιφάνεια διαρροής
- ΜΗΧΑΝΙΚΗ ΠΕΤΡΩΜΑΤΩΝ
- Σκυρόδεμα
- Material failure
- Failure criterion
- Elastoplastic model
- Yield surface
- Rock mechanics
- Concrete
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Πολιτικού Μηχανικού
- Μηχανική Υλικών
- Engineering and Technology
- Civil Engineering
- Materials Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/29310