Back to search

University of Thessaly (UTH)

Η μηχανική των επαφών στα ελαστομερή υλικά: ανάλυση πειραμάτων διείσδυσης και εφαρμογές στις ανθρώπινες αρτηρίες

Abstract

dc:description

This present project refers to the problem of contacts in elastomers and then became an effort to apply the theory to specific type of materials called bio-materials. Bio-materials such as human arteries belong in the subcategory of elastomers.Elastomers belong in the general category of polymers with high levels of elasticity caused by their internal structure. To calculate their mechanical properties basic premise is to measure the hardness with an experimental procedure called hardness measurement. The measurement takes place on the outer surface of the sample. Sometimes a sharp object penetrates into the material and sometimes "pulls" the surface of the specimen outwards. Depending on the hardness that the sample has, the appropriate experimental procedure is being chosen. In the first and second chapter, we studied the problem of hardness measurement on surfaces of elastomers with spherical and conical penetrator, respectively. Having measured the hardness of the material through the experimental procedure, we proposed a methodology for calculating the modulus in the rubbery samples. The modulus of elasticity is unique for each material and because of this fact it is a highly important mechanical property. This is a property that describes the condition of the material and can give us important information about it. In particular, knowing the modulus of elasticity of a healthy material we can conclude if the main body is sick or not.The third chapter describes the hardness measurement of a prestressed elastomeric sample. To describe a material we need a model characterized by a statute law. Each constitutive law consists of fixed parameters that vary depending on the material. Therefore it is necessary to calculate these constants to simulate the corresponding material. The hardness measurement though is not enough to make this happen, as by penetrating undeformed sample we can calculate only one constant of the material. So we deemed necessary to move the pretension of the main body in order to calculate the other constant parameters and eventually emerge the constitutive law describing the material. Since the pretension we imposed is a kind of draft, we decided to see what would happen if we confining the "body" as detailed in the fourth chapter. When drawstring an elastomeric material, the sample appears to be disrupted if a certain fragment is exceeded during the crushing. This is of particular interest for further future research. Completing the project, in the fifth chapter, we applied the theory of elastomeric materials in a "body", such as human artery, which belongs to the category of bio-materials. In this case, we used constitutive laws describing anisotropic materials and proposed a methodology for calculating the residual stress in a human artery at load-free state and loaded state.

Degree

thesis:*
Grantor dc:publisher
University of Thessaly (UTH)
Year dc:date
2013

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Zafiropoulou, Vasiliki
  • Ζαφειροπούλου, Βασιλική

Subjects

dc:subject × 20

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/29346

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Zafiropoulou, Vasiliki; Ζαφειροπούλου, Βασιλική. Η μηχανική των επαφών στα ελαστομερή υλικά: ανάλυση πειραμάτων διείσδυσης και εφαρμογές στις ανθρώπινες αρτηρίες. University of Thessaly (UTH), 2013. http://hdl.handle.net/10442/hedi/29346