Aristotle University Of Thessaloniki (AUTH)
Χαρακτηριστικά δομής και τεχνικές ιδιότητες ξύλου ελιάς (Olea europaea L.) σε σχέση με την αξιοποίηση του
Abstract
dc:descriptionOlive tree is a symbol of civilization and culture all around the Mediterranean basin. Dominant element of Mediterranean evergreen hardwoods zone, which covers the 48,42% of Greek forestland, and one of the most cultivated species in Greece. Olea europaea L. produces two of the most popular products, olive oil and olives. Olive wood’s is mainly used as charcoal. This paper reports on the potential utilization of olive wood as a raw material for carpentry. Wild and cultivated olive wood specimens were tested in comparison, in order to detect structural differences between them. The timber for this project comes from a territory covered exclusively with evergreen hardwoods and was provided by a Forest Service Department located in Stavros, near Thessaloniki. Olive wood structure research through microscopy (fiber length, vessel dimensions, cell types appearance on cross, radial and tangential permanent sections) took place for wild and cultivated olive wood. In addition to that, physical wood properties (dry and basic density, volume shrinkage) mechanical wood properties (static bending, compression strength, toughness and hardness) and chemical wood properties (extractives, acidity, ash content) were tested, statistically analyzed and compared between wild and cultivated, olive wood. Plenty of parenchyma cells on cross sections, shorter fiber and vessel length for cultivated olive wood, higher density and volume shrinkage, higher bending and compression strength, higher hardness and toughness behavior for wild olive wood were resulted. Proposing a potential utilization of olive wood as raw material for wood industry, two different types of processing were applied on olive wood logs. Four decorative panels were designed and manufactured using short dimensional logs (2.5X2.5X50 cm), in order to avoid potential defective behavior and reveal olivewood’s unique grain. Aiming to detect olivewood’s curving potential, two different patterns were applied by lathe machine, on longer dimensional olivewood logs (8.0X8.0X50 cm). Crafting olivewood was resulted a rather difficult and time - consuming process mostly due to high density and hardness, but provided unique final products. A combination of decorative panels and curved logs presented by this paper consists a potential utilization of olive wood as a raw material for carpentry.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2010
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Giagli, Kyriaki
- Γιαγλή, Κυριακή
Subjects
dc:subject × 20- Ξύλο Olea europaea L.
- Ξύλο αγριελιάς
- Ξύλο καλλιεργούμενης ελιάς
- Μικροσκοπία
- Ανατομία
- Μηχανικές ιδιότητες
- Χημικά χαρακτηριστικά
- Αξιοποίηση
- Olea europaea L. wood
- Wild olive wood
- Cultivated olive wood
- Microscopy
- Wood anatomy
- Mechanical properties
- Chemical characteristics
- Utilization
- Φυσικές Επιστήμες
- Γεωεπιστήμες και Επιστήμες Περιβάλλοντος
- Natural Sciences
- Earth and Related Environmental Sciences
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/29761