Back to search

Technical University of Crete (TUC)

Προσομοίωση της κατεργασίας της διάτρησης με πεπερασμένα στοιχεία λαμβάνοντας υπόψη τα δυναμικά φαινόμενα και βελτιστοποίηση των συνθηκών κοπής

Abstract

dc:description

Hole defects can lead to expensive production waste, as drilling operations are usually among the final stages in a manufacturing plan. A significant percentage of these problems refer to the wrong selection of cutting conditions. Common problems include unnecessary forces that lead to stress concentrations and thus reduced drill life and self-exciting vibrations. These problems affect the surface finish and final dimensional accuracy. To overcome these problems an extensive tool force analysis has to be conducted in order to investigate the distribution and magnitude of the forces arising, for different tool geometries and cutting conditions.The present thesis introduces a novel simulation code called DIATRISIS that simulates the process of drilling, considering dynamic phenomena and their effects on the cutting tool and workpiece. The first step of the proposed method involves the accurate tool modeling. For this purpose a custom standalone application based on the API (Application Programming Interface) of a commercial CAD system has been developed. The application is able to create 3D solid models of conical, hyperboloidal and ellipsoidal twist drills. Furthermore the software is able to model the drill shank and margin, which is very useful in the cutting tool’s static and dynamic analysis.The method proposed, considers the drill’s main cutting edge as a series of ten oblique sub models whereas the half of chisel edge is divided in two orthogonal sub models. This approach provides user with faster calculation times and more accurate results. For each sub model, the elementary cutting tool and workpiece geometry are determined, as well as their positioning and assembly. The geometry of each section is derived from analysis of the 3D solid model. The third step involves the customized discretization of each model as well as defining the contacts, the material model, the boundary conditions and the simulation parameters. DIATRISIS is then used for developing the appropriate input file for the solver. Finally the software post processes the results in order to extract the thrust force and torque distribution, both in the main cutting edge and the chisel. The simulation results were extensively verified by a number of experiments, approving the reliability of DIATRISIS. A graphical user interface has been developed in order to automate the above procedure. Moreover, a finite element program was used to simulate the displacements and the stresses distribution on all the cutting edges under static or dynamic loading. The algorithm developed combines the resulting cutting forces distribution with DRILL3D chip thickness results in order to calculate the model boundary conditions. In the first step the contact length of the chip-tool interface was accurately calculated using the chip compression ratio (CCR). The CCR was accurately measured by a special experimental setup that has been introduced, utilizing a high-speed camera. The second step involves the interpolation of the time dependent tool displacements into the tool trajectory, forming a 3D deformed hole. In the last step the software calculates the hole quality characteristics such as roundness, cylindricity, concentricity and coaxiality according to the ISO standards.

Degree

thesis:*
Grantor dc:publisher
Technical University of Crete (TUC)
Year dc:date
2013

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Belis, Taxiarchis
  • Μπελής, Ταξιάρχης

Subjects

dc:subject × 15

Rights

dc:rights
Statement dc:rights
  • BY_NC_ND
Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/29845

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Belis, Taxiarchis; Μπελής, Ταξιάρχης. Προσομοίωση της κατεργασίας της διάτρησης με πεπερασμένα στοιχεία λαμβάνοντας υπόψη τα δυναμικά φαινόμενα και βελτιστοποίηση των συνθηκών κοπής. Technical University of Crete (TUC), 2013. http://hdl.handle.net/10442/hedi/29845