Back to search

National Technical University of Athens (NTUA)

Semiconducting and metallic nanoparticles for non-volatile memory applications

Abstract

dc:description

The motivation of this thesis is to study the performance of non-volatile memory devices based on semiconducting and metallic nanoparticles in order to allow the further scaling of the FLASH EEPROM architecture based up to now on the 40 years old floating-gate concept. The above is realized by 1) the investigation of the radiation hardness of Si nanocrystal non-volatile-memories, and 2) the fabrication and characterization of non-volatile-memory devices with metallic nanoparticles and high-k control oxide following a low thermal budget process.The first part of this PhD work focuses on the investigation of the radiation hardness of nanocrystal non-volatile-memories. Because of the discrete nature of the storage nodes, nanoparticle memories indeed present a higher hardness to total-ionizing-dose radiation effects than standard floating gate memories. In general, the way ionizing radiation affects non-volatile memories are mainly of two kinds: 1) loss of the stored information due to flat-band or threshold voltage shift related to the radiation induced positive charge buildup in the gate stack (bit-flip), and 2) charge retention issues after exposure to the radiation environment. In this thesis it is demonstrated that according to the results available in the literature for standard floating gate devices, nanoparticle memories present 5-10 times higher hardness to bit-flips and retention issues thus justifying the interest of the scientific community on these devices for use in high radiation environments. In particular, in this work are presented total-ionizing-dose effects on non-volatile-memory devices based on Si nanocrystals embedded in a SiO2 matrix, in the form of capacitors and transistors. The memory devices were irradiated with protons of 1.5 and 6.5 MeV and fluencies from 3 1011 p/cm2 up to 5 1013 p/cm2. The capacitor devices, which had a gate stack thickness larger than the transistors, after irradiation present bit-flip. On the other hand, the transistor devices did not present any bit-flip after irradiation, mainly because of the thinner gate stack structure, thus indicating the high radiation hardness of these devices. The radiation induced interface states are found to be the main contributors to the charge loss during retention after irradiation. It is demonstrated that while retention of holes is almost unaffected by radiation exposure, the retention of electrons present an evident correlation with the amount of radiation induced interface states. In any case even at the highest fluencies considered here, the devices still fulfill the FLASH retention standard requiring a 10 year charge retention for both the write and erase states. The second part of this PhD is devoted to the fabrication and characterization of non-volatile memory devices with metallic nanoparticles in a mixed gate stack structure with SiO2 tunneling oxide and high-k HfO2 control oxide. The motivation of this particular investigation is double: 1) mixed gate stack structure enhance the electric field in the tunneling oxide, thus lowering the operating voltages of the devices, and 2) the large variety of available metals (and thus work-functions) used to fabricate metallic nanoparticles allow to engineer the depth of the storage well to improve the programming and retention device characteristics. In this work it is demonstrated that the high-k control oxide can be fabricated using a low thermal budget process (Tmax < 400°C) in order to avoid the diffusion of metallic atoms from the nanoparticle layer into the dielectrics. Using such process, reference devices present negligible hysteresis while non-volatile memory devices with Ni or Pt nanoparticles present large hysteresis of 2-3 V with low programming voltages (<10V) and long retention times. In the effort to optimize the high-k HfO2 layer is also shown that the HfO2, deposited by sputtering, is suitable for use as charge-trapping layer in charge trap non-volatile memories. SNOS-like devices fabricated during this PhD work, show very large hysteresis (~10V) and long retention times. Electrical characterization of these devices enabled the realization of a simulation tool entirely written in Mathematica 7 code (4000 code lines) which allows to simulate the dynamic operation of such memory devices with results in good agreement with experimental ones. Regarding the nanoparticle deposition it should be mentioned that in this work the nanoparticles are fabricated using a room temperature technique which generates metallic nanoparticles with a charge of 1 electron. For this reason a Monte-Carlo tool is also presented, written with Mathematica 7 code (1000 code lines), which allows simulating the deposition of charged metallic nanoparticles on patterned silicon substrates giving insight to an interesting electrodynamic focusing effect suitable for the selective deposition of metallic nanoparticles.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2010

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Verrelli, Emanuele

Subjects

dc:subject × 22

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/29999

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Verrelli, Emanuele. Semiconducting and metallic nanoparticles for non-volatile memory applications. National Technical University of Athens (NTUA), 2010. http://hdl.handle.net/10442/hedi/29999